- Description
Details
The GX5 power amplifier is ideal for professional entertainers who require maximum performance and portability on a limited budget. The hallmarks of the QSC brand - professional audio quality, meticulous engineering, precision manufacturing and long-term reliability - are all intrinsic to GX. Add contemporary styling, multiple input/output options, light weight, and advanced protection circuitry, and the GX Series clearly represents real value - something everyone can use.
GX amplifiers deliver just the right amount of power to the most popular speakers used by entertainers. Typically, loudspeaker manufacturers recommend an amplifier with power output equal to the speaker's Program (Music) Power rating or two times (2 x) the Continuous (RMS) Power rating.
The QSC GX5 Power Amplifier uses a Class H system, based on key elements of the PL Series, (PLX, PL3, CX, DCA) almost doubling power in the same size and weight. QSC design expertise allows the output devices to shift from low-power to high-power rails in less than a millionth of a second, ensuring that the output power is always right where it needs to be without excess loss.- Features
Features
- Power levels matched to the most popular speakers used by entertainers
- Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
- Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
- Outputs: Speakon® combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only)
- Binding posts support all other speaker wiring systems
- Minimum depth chassis (10.1"/257 mm) fits in compact, inexpensive effects racks
- Detented gain controls for precise setting and matching of sensitivity
- GuardRail™ automatically protects the amplifier and loudspeakers from damage
- Front panel LEDs monitor Power, Signal and Clipping
- Subwoofer/Satellite crossover built-in
- Specification
8 ohms / 1 kHz (both channels driven) 500 W 8 ohms / 1 kHz (single channels driven) 600 W 4 ohms / 1 kHz (both channels driven) 700 W 4 ohms / 1 kHz (single channels driven) 850 W Distortion (typical) 20 Hz - 20 kHz, 1 dB below rated power 8 ohms: less than 0.05%4 ohms: less than 0.1% Signal to Noise (20 Hz - 20 kHz) 100 dB Input Sensitivity 1.2 Vrms Voltage Gain (8 ohms) 34.4 dB Output Circuitry 2-tier Class H Power Requirements (1/8 power, pink noise at 4 ohms, 120V) 6A Frequency Response 20 Hz - 20 kHz, +0, 1 dB Dynamic Headroom (4 ohms) 2 dB Input Impedance (ohms) Greater than 20k (balanced) Maximum Input Level +24 dB (16 Vrms) Input Connectors (each channel) 3-pin XLR and 1/4" TRS, balanced, parallelPhono, unbalanced Output Connectors (each channel) Speakon®, 1/4", Binding Posts Amplifier and Load Protection Short circuit, open circuit, thermal, RF protectionLoad protected against DC faults Front Panel Controls and Indicators Gain controls, 21 detentsRed Clip LEDs, proportional, 0.1% THD thresholdGreen Signal LEDs Front Panel Controls and Indicators threshold -35 dB Blue Power LED, AC on Rear Panel Controls Full Range / Crossover switch100 Hz, 3rd order LP (sub), 2nd order HP (top) Dimensions (H x W x D) 3.5" (89 mm) x 19" (483 mm) x 10.1" (257 mm) Weight 26 lbs (12 kg) Shipping Weight 31 lbs (14 kg) - Documents
Documents
- Reviews
Write Your Own Review
GET RELIABLE FREE SHIPPING* WITH CODE: FREESHIP
*Valid On Orders $49.99 and Up - Click Here For More Details
Quote 0 item
Recently added item(s) ×
You have no items in your quote.
Cart 0 item
Recently added item(s) ×
Your cart is empty.
