- Description
Details
Where portability and convenience are important criteria, a system based on a high-performance Yamaha EMX-series powered mixer is definitely the way to go. In one integrated, portable unit you have a mixer to combine and balance your microphone and instrument and line sources, effects to refine and polish your sound, and power to drive the main speakers and even monitor speakers as well. But that's nowhere near the whole story - Yamaha EMX-series Powered Mixers offer a range of features that let you mix, process, and deliver your sound with maximum quality and creative control … and, of course, that unrivalled Yamaha sound.
The EMX-series powered mixers integrate mixer, power amplifier, graphic EQ, and digital effects into a compact, portable unit. No need for complex setup and wiring — simply plug in and play! The entire system is optimized, so it's easy to get great sound just about anywhere.
Parts selection is crucial to achieving the best possible sound, and Yamaha spares no effort in selecting the best. The critical head amplifier circuit, for example, uses special low-noise chip resistors that are deposited on a thin film of nichrome for accurate, noise-free reproduction. Special care has also been taken in laying out the system's grounding as well as the circuitry in general to ensure that no unwanted noise or interference degrades the quality of the sound.
The mixer section offers a total of 12 inputs in a very versatile configuration: channels 1 through 4 are mono microphone or line inputs, channels 5/6 and 7/8 can function either as mono microphone/line inputs or stereo line inputs, and channels 9/10 and 11/12 are stereo line inputs. Connectors are also provided for connection to external power amplifiers and effect processors. Stereo channels 9/10 and 11/12 include phono jacks for direct connection of CD players or other music playback devices, to which the 3-band channel equalizers can be applied as required. There are also two 7-band graphic equalizers that can be used to match speaker and/or room response for optimum sound.- Features
Features
- All-in-one for Easy Operation and Fast Setup
- Superior Sound through Painstaking Design and Parts Selection
- Intuitive, Functional Controls and Connectivity
- Built-in SPX Effects
- High-efficiency Power Amplifiers
- Lightweight, Practical Design
- Uncompromising Reliability and Safety Standards
- Forced Air Keeps the System Cool Even in Difficult Conditions
- New Compressor Circuit on the EMX512SC and EMX312SC
- Practical Utility Features
- Yamaha Speaker Processing
- Power Amp Mode Selector
- Optional Rack Mount Hardware
- Specification
Maximum Output Power @ 0.5 % THD at 1 kHz 500 W/4 Ω; 350 W/8 Ω Frequency Response -3, 0, 1 dB 20 Hz-20 kHz, ref to the nominal output level @ 1 kHz Total Harmonic Distortion Less than 0.5 % (THD+N) +14 dB @ 20 Hz, 1 kHz, 20 kHz, GAIN control: all nominal Hum & Noise Equivalent Input Noise, -115 dBu, Rs = 150 Ω CH 1-4 MIC/LINE: MIC Crosstalk -65 dB @ 1 kHz Input Connectors CH 1-4: XLR and Phone; CH 5/6, 7/8: XLR and Phone; CH 9/10, 11/12: XLR and Pin CH EQ HIGH, MID, LOW Phantom Power 15 V Graphic Equalizer 7 Band (125, 250, 500, 1 k, 2 k, 4 k, 8 kHz): Main (Stereo) and Monitor Digital Effects SPX Digital Multi Effector (24 bit AD/DA, 32 bit Internal Processing): 16 Programs Power Amp Mode Main L/R, Main (L+R)/Monitor Foot Switch On/Off Power Requirements 120 V 60 Hz Power Consumption 450 W Dimensions (H x W x D) 11.19" (284 mm) x 17.44" (443 mm) x 10.38" (264 mm) Weight 17.6 lbs (8 kg) - Reviews
Write Your Own Review