More Views

Radial Engineering Firefly Tube Direct Box (Discontinued)
Part # R800 2020
Model # Firefly

The Radial Firefly™ is a high output tube direct box designed for stage and studio. It combines Radial's award winning zero negative feedback class-A front end with the warmth and character of a 12AX7 tube drive circuit and Radial's legendary transformer coupled output.

Need Quantity Pricing?

We provide quantity discounts for contractors & installers, schools, government, and military buyers on select brands and products.

Talk To An Engineer

Description

Details

The Radial Firefly™ is a high output tube direct box designed for stage and studio. It combines Radial's award winning zero negative feedback class-A front end with the warmth and character of a 12AX7 tube drive circuit and Radial's legendary transformer coupled output.

The Firefly features A and B instrument inputs with easy access level controls to accelerate instrument changes on stage. This enables the artist to switch between two different instruments and deliver a consistent signal to the PA system and on-stage amp. Switching can be done via the front panel or with the optional JR2 remote control. This connects to the Firefly using a balanced cable and adds a mute function for quiet on-stage adjustments.

To optimize performance with electric bass, the Firefly is equipped with Drag Control™ load correction that lets you adjust the load on a magnetic pickup so that it 'feels' as if connected to a tube amplifier. For 'fussy' piezo transducers, Drag can be bypassed to increase the input impedance to 4 meg-ohms to eliminate the squawk and peaks that plague these types of pickups. A fully variable high-pass filter may be dialed in to eliminate low-frequency resonance that can cause feedback on stage or muddy sound when recording.

The rear panel sports two stacked ¼" instrument A & B-INPUTS and a THRU output for the on-stage amp. The THRU offers a choice of pre or post tube configuration. Additionally, a TRS insert jack enables external effects to be shared between both inputs. A buffered 'always on' tuner output can be used to split the instrument signal in the studio or it can be dedicated to an electronic tuner. The tuner output can be used for silent tuning when the optional JR2 remote is connected. The balanced XLR output is equipped with a ground lift switch to help eliminate buzz and hum caused by ground loops and a 180° polarity reverse to tame feedback hot spots on stage or help phase align the PA system with the on-stage amp. The Firefly may also be rack mounted alone or in pairs by ordering the optional 19" rackmount kit.

The Firefly combines the warmth, character, and feel of a vintage tube device with the low noise and performance of today's most advanced audio technology.

⚠️WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Features

Features

  • 2 inputs, with level control
  • panel switch or optional JR2 remote footswitch for switching between inputs
  • Footswitch and front panel are equipped with LED indicators for status monitoring
  • Drag control load correction
  • Comes with two 12AX7 tubes
Specification
Frequency Response20Hz ~ 20kHz
Maximum Gain - 1/4+22dB
Noise-98dBu
Dynamic Range100dB
Equivalent Input Noise-100 dBu
Input Impedance (Drag Control Off)4Meg-Ohms
Input Impedance (Drag Control On)Variable from 22k ~ 500k Ohms
Output Impedance at XLR200 ohms (nominal)
Low-Cut FilterVariable from 25Hz ~ 500Hz (-3dB point)
Power Supply+/-16v (1600mA) 5-pin XLR power supply
Dimensions (H x W x D)
With Handle
1.75" (45 mm) x 5.75" (146 mm) x 8.25" (210 mm)
2.75" (70 mm) x 5.75" (146 mm) x 8.25" (210 mm)
Weight3.95 lbs (1.8 kg)
Documents
Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: Radial Engineering Firefly Tube Direct Box (Discontinued)