- Description
Details
The Yamaha XP series offers five power amplifier models that deliver unmatched quality and value for installations. These power amplifier feature high power, outstanding sound quality, extended reliability, and superior stability for a wide range of installed sound systems as well as portable live sound applications.
- Features
Features
- 700 Watts per Channel @ 8 Ohms, 20Hz-20kHz
- High sound quality equivalent to upper-class models and emphasizing on superior sound
- A design that ensures high sound quality and efficiency down to the finest details for full achievement of both high-definition sound and superior value
- Yamaha's exclusive state-of-the-art high-efficiency amplifier driving technology EEEngine installed
- A gain switch that can be changed to +4dBu / 26dB / 32dB has been installed on the rear panel for compatibility with a wide variety of input levels
- Light weight and compact design of 2U size for installation in any location
- Monitor and remote terminals for monitoring and control from a remote location
- High-accuracy 1dB-step detented attenuator
- Various terminals and features suitable for professional use
- Special high-pass filter that enables change of cut-off frequency
- Equipped with various protection circuits, indicators and stepless low-noise fans
- Stereo Mode: for driving 2-channel sources independently
- Parallel Mode: for driving monaural sources using 2 channels
- Bridged Mode: for high-powered driving of 2 internal amplifiers as a single monaural amplifier
- Best matches with the digital mixing engine DME64N/24N and Installation series speakers
- Specification
Output Power, 8Ω 700W+700W S/N Ratio, 20Hz-20kHz 104dB Idle Power Consumption 35 Watts 1/8 Power Consumption 650 Watts (4Ω/Pink Noise) Power Bandwidth 10Hz - 40kHz (Half Power THD+N=0.5%) THD+N 20Hz 0.1% 20kHz, Half Power Intermodulation Distortion 0.1% 60Hz: 7kHz, 4:1, Half Power Frequency Response 0dB RL=8Ω, Po=1W, HPF=OFF Channel Separation, Half Power 70dB RL=8Ω 1kHz, ATT. Max input 600Ω shunt Residual Noise -70dBu Att. min, 20Hz-20kHz (DIN AUDIO) Damping Factor, 8Ω, f=1kHz More than 350 Voltage Gain, ATT. Max 32dB or 26dB or +4dBu input sensitivity by select switch Maximum Input Voltage +22dBu Controls, Front panel Power switch (push on/push off), attenuator (31 position) x 2 Controls, Rear panel Mode switch (Stereo/Bridge/Parallel) x 1, HPF switch x 2, Gain Select switch x 1 Connectors, Input XLR-3-31 type/ch, Euroblock connector (balance)/ch Connectors, Output Speakon/ch, 5 way binding post x 1 Connectors, Monitor/Remote Dsub15P x 1 Indicators Power/Standby x 1 (Green/Orange), Signal x 2 (Green), Clip/Limit x 2 (Red) Load Protection Power switch on/off mute, DC-fault: power supply shutdown/do not return automatically Amplifier Protection Thermal (Mute the output; heatsink temp ≥ 90°C; Operation not restored automatically), VI limiter (Limit the output, RL ≤ 1ohm) Power Supply Protection Thermal (Amplifier shuts down automatically; heatsink temp ≥ 100°C) Power Requirements UC: 120V/60Hz, EU: 230V/50Hz, A: 240V/50Hz Dimensions (H x W x D) 3.44" (88 mm) x 18.88" (480 mm) x 17.94" (456 mm) Weight 30.9 Ibs (14 kg) - Documents
- Reviews
Write Your Own Review