Bose L1 Model 1S System with B1 Bass (Discontinued)
Part # 359372-0010
Model # L1 Model 1S Single B1 Bass System
The Bose L1® Model 1S System with B1 Bass portable line array system delivers a potent combination of portability and performance. Closely spaced drivers allow the L1 Model 1S system to project sound forward and to the sides.

Availability: No Longer Available
Replaced by Bose L1PRO32 + SUB1 Not Sure? Email Us [email protected] Get Friendly Help Fast!

Need Quantity Pricing?

We provide quantity discounts for contractors & installers, schools, government, and military buyers on select brands and products.

Talk To An Engineer

Description

Details

Spend less time setting up your gear and more time enjoying it. The new L1 Model 1S portable line array system delivers a potent combination of portability and performance. It's compact and light enough to make setup quick and easy, yet powerful enough to fill a mid-sized venue. This system works well for solo musicians, bands and public speakers. Includes one B1 bass module for enhanced low-end performance.

Put your PA behind you

The vertical configuration of the system's small, closely spaced drivers allows the L1 Model 1S system to project sound forward and to the sides—delivering 180-degree coverage—but very little up and down, reducing unwanted reverberation. This produces consistent tonal balance as sound spreads more evenly across the stage and into the audience, and the volume level drops off much more slowly than with a conventional speaker.
Unique Bose® technologies enable the system to serve as both PA and monitor. It can be positioned behind or to the side of the performer—and you hear just what the audience hears. You're in control, and there's no need for conventional monitors, mixers and PA systems.

Convenience to go

The three components of the L1 Model 1S system—upper array, lower extension and power stand—connect quickly and easily without the need for separate speaker stands. Setup and breakdown take just minutes. And everything stores neatly into the included carry bags, making transport easy, too.

Deep bass from small enclosures

The B1 bass module is our more portable bass option. It is considerably lighter and smaller than conventional bass bins required for the same performance. And it ensures more accurate amplification of lower notes for most voices and instruments.
With the L1 Model 1S system you can add a second B1 module or power one B2 bass module for more flexibility and even greater power.

Multichannel flexibility

The optional T1 ToneMatch audio engine adds four more channels, so you can expand the system and connect additional instruments and microphones. You can also use the ToneMatch engine to fine-tune your sound with powerful, proprietary tone-shaping tools.

Features

Features

L1 Model 1S System

  • Compact, lightweight enclosure
  • Recommended for audiences up to 300
  • 12-driver articulated line array delivers 180-degree horizontal sound coverage
  • Produces consistent tonal balance with less volume drop-off over distance
  • Easy transport, setup and breakdown
  • Spatial Dispersion™ and Articulated Array® speaker technology
  • Integrated power amplifiers
  • ToneMatch® port
  • Analog input, trim control and signal/clip LED
  • Bass module out
  • Interlocking design
  • Retractable legs

B1 Bass Module

  • Light and compact
  • Two 5.25" (13.3 cm), high-output, high-excursion drivers
  • Automatically adjusts bass signal
  • Interlocking feet securely stack up to four modules together on their sides
  • Includes a 4-wire 5 ft (1.5 m) cable to connect the module to a power stand and a slip cover
Specification
L1 Model 1S System
System TypeSelf powered, two-way
Frequency Response (+/-3 dB)140 Hz - 12 kHz
Frequency Range (-10 dB)132 Hz - 14 kHz
Nominal Dispersion195° H x 10° V
Maximum SPL @ 1 m2112 dB SPL (118 dB SPL peak)
Crossover Frequency200 Hz (24 dB / octave)
Weight
Top Array23.7 lb (10.7 kg)
Bottom Extension8.5 lbs (3.8 kg)
Power Stand23.7 lbs (10.7 kg)
Dimensions
Top Array (H x W x D)43.5" (111 cm) x 3.5" (9 cm) x 4" (10.5 cm)
Bottom Extenstion (H x W x D)39.63" (100.6 cm) x 4.15" (10.6 cm) x 4.13" (10.5 cm)
Power Stand (H x W x D)5" (12.8 cm) x 10" (26.2 cm) x 27" (69.2 cm)
B1 Bass Module
Impedance8 Ohms
DriverTwo 5.25" (13.3 cm)
Weight25.1 lbs (11.4 kg)
Dimensions (H x W x D)15" (38 cm) x 10.25" (926 cm) x 17.75" (45 cm)
Total System Weight81 lbs (36.74 kg)
Documents
In the Box

In the Box

  • L1 Model 1S power stand and cord
  • L1 Model 1S top array and bottom extension
  • Loudspeaker carrying bag
  • Power stand carry bag
  • B1 bass module and cable
  • B1 slip cover
Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: Bose L1 Model 1S System with B1 Bass (Discontinued)