More Views

Audio-Technica AT2035 Cardioid Condenser Microphone
Part # AT2035
Model # AT2035

Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise.

Availability: Usually arrives in 5-9 business days.

Please be aware that global supply shortages outside our control may interfere with our normal delivery times and product availability. For more information, email [email protected] or call us at 888-256-4112.

Free Shipping!
List Price $149.99
Pro Acoustics Price $149.00
OR

Need Quantity Pricing?

We provide quantity discounts for contractors & installers, schools, government, and military buyers on select brands and products.

Talk To An Engineer

Description

Details

Audio-Technica AT2035 Large Diaphragm Cardioid Condenser Microphone

The AT2035 is intended for use in professional applications where remote power is available. It requires 11V to 52V DC phantom power, which may be provided by a mixer or console, or by a separate, in-line source such as the Audio-Technica AT8801 single channel or CP8506 four-channel phantom power supplies.

Output from the microphone's XLRM-type connector is low impedance (Lo-Z) balanced. The signal appears across Pins 2 and 3; Pin 1 is ground (shield). Output phase is "Pin 2 hot" – positive acoustic pressure produces positive voltage at Pin 2.

To avoid phase cancellation and poor sound, all mic cables must be wired consistently: Pin 1-to-Pin 1, etc.

An integral 80 Hz hi-pass filter provides easy switching from a flat frequency response to a low-end roll-off. The high-pass position reduces the microphone's sensitivity to popping in close vocal use. It also reduces the pickup of low-frequency ambient noise such as traffic, air-handling systems, etc.), room reverberation and mechanically-coupled vibrations.

In use, secure the cable to the mic stand or boom, leaving a slack loop at the mic. This will ensure the most effective shock isolation and reduce the possibility of accidentally pulling the microphone out of its mount.

Avoid leaving the microphone in the open sun or in areas where temperatures exceed 110° F (43° C) for extended periods. Extremely high humidity should also be avoided.

Features

Features

  • Large diaphragm for smooth, natural sound and low noise
  • High SPL handling and wide dynamic range provide unmatched versatility
  • Custom shock mount provides superior isolation
  • Switchable 80 Hz high-pass filter and 10 dB pad
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Includes custom shock mount & protective pouch
Specification
ElementFixed-charge back plate permanently polarized condenser
Polar PatternCardioid
Frequency Response20 - 20,000 Hz
Low Frequency Roll Off80 Hz, 12 dB/octave
Open Circuit Sensitivity–33 dB (22.4 mV) re 1V at 1 Pa
Impedance120 ohms
Maximum Input Sound Level148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Noise12 dB SPL
Dynamic Range (Typical)136 dB, 1 kHz at Max SPL
Signal-To-Noise Ratio82 dB, 1 kHz at 1 Pa
Phantom Power Requirements11-52V DC, 3.8 mA typical
SwitchesFlat, roll-off; 10 dB pad (nominal)
Output ConnectorIntegral 3-pin XLRM-type
Dimensions170 mm (6.69") long, 52 mm (2.05") maximum body diameter
Weight1 lbs (403 g)
Documents

Documents

Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: Audio-Technica AT2035 Cardioid Condenser Microphone