- Description
Details
The IR-100 VoiceLink I 1-Channel Infrared Receiver with Power Supply from TeachLogic is a preamp-only receiver and is designed to be plugged into an existing power amplifier or the input of a multi-media sound system. This receiver is designed for use with the VoiceLink I Infrared Wireless Microphone Sound System. The VoiceLink I Wireless System will expand your multi-media sound system to include voice reinforcement via an infrared wireless microphone. The auxiliary input on the front panel of the receiver allows the input of an iPod, computer, or DVD to supplement the instructional program.
- Features
Features
- One infrared receiver channel
- One line level auxiliary input
- Line level output - Balanced (3-pin Phoenix) - Unbalanced (RCA)
- Excellent for recording with an active board for internet podcasts
- Extremely easy to interface with most video projectors
- Two sensor inputs
- Mounting brackets
- Wall mount sensor with 30' cable
- Specification
Receiver Input: Infrared FM Modulation FM wide-band Frequency Reception Frequencies: Channel A: 2.08 MHz Wavelength Infrared Wavelength: 850 nm Tone Signal Channel A: 32.768 kHz De-Emphasis 50 µs Frequency Response 50 Hz, -13 kHz, ±3 dB S/N Ratio >65 dB THD <1% @ 1 kH Nominal Deviation ±10 kHz Maximum Deviation ±25 kHz Input External Sensor: 2 x RCA
Auxillary: 3.5 mm with gain control (front panel)Line Output 1 V balanced line level
3-pin Phoenix connector
Unbalanced line level
RCAPower Supply 12 VDC / 0.6 A / 7.2W Enclosure ABS Dimensions (H x W x D) 1" (25.4 mm) x 5" (127 mm) x 4.5" (114.3 mm) Weight 9.10 oz (257.98 g) - Documents
Documents
- Reviews
Write Your Own Review