Williams Sound PPA R37 HD FM Receiver with Belt Clip and Headphones

Home /
Commercial Sound Equipment /
Assistive Listening Systems /
Assisted Listening Components /
Transmitters & Receivers /
Williams Sound PPA R37 HD Receiver with Belt Clip Headphones and Batteries

Description

Details

Flexible and simple. The FM receiver features easy-to-use, seek-button channel selection with access to 17 pre-set wideband frequencies between 72 - 76 MHz. Compatible with the following Williams Sound transmitters: PPA T46, PPA T45, PPA T45NET, PPA T27. Digitally synthesized for even greater audio clarity and stability. A versatile 3.5 mm stereo/mono jack allows for a variety of earphone and headphone options and is neckloop/telecoil-equipped-hearing-aid compatible.

Includes HED 021 headphone.

NOTE: The Receiver requires a transmitter operating on 72-76 MHz. The Receiver is approved by the FCC for operation in U.S. Markets. The receiver cannot be used in all countries. Check with your government´s radio regulations for 72-76 MHz operation.

Features

Features

Seek-button access to all 17 wideband frequencies in the 72 - 76 MHz bandwidth
Channel-lock capability
Battery-saving sleep mode
Low-battery indicator
Field tunable

Specification

Battery Type	Two (2) (BAT001), approx. 48 hours,Two (2) AA rechargeable NiMH (BAT 026), 1600 mAh,approx 30 hours
Current Consumption	Nominal 52 mA
Operating Frequency	17 channels
FM Deviation	+75 kHz
De-Emphasis	75 μS
LED Indicator	Power: Bright Green, Low Battery: Flashes
Sensitivity	2 μV at 12 dB Sinad with squelch defeated
Input Overload	100 mV
Frequency Response	200 Hz to 15 kHz, ± 3 dB
Signal-to-Noise Ratio	65 dB at 100 μV
Receiver Antenna	Headphone cord
Audio Output	35 mW, max. 16 ohm load
Output Connector	3.5 mm stereo phone jack, accepts either stereo or mono plug
Approvals	FCC, Industrie Canada, RoHS, WEEE
Dimensions (H x W x D)	4.1" (104 mm) x 2.85" (72 mm) x 1.38" (35 mm)
Weight	0.28 lbs (0.127 kg) with batteries

Documents