- Description
Details
This two-channel infrared listening system provides up to 30,000 square feet of coverage in single-channel mode (with WIR RX22 receiver) and supports an additional emitter for additional coverage area. Each turnkey package includes a rack-mountable modulator; stylish, lightweight, under-the-chin style receivers; and a multi-bay charger. Ideal for language interpretation, hearing assistance and private listening. This easy-to-use system ensures private and secure transmission within the listening area. Meets ADA (Americans with Disabilities Act) accessibility guidelines.
- Features
Features
- WIR TX9 - with DC power supply
- Accepts mic/line inputs
- Supports additional emitter for additional coverage area
- Adjustable volume control
- Resistant to high-efficiency lighting interference
- 5-year warranty (90 days on accessories)
- Specification
WIR SYS 3 System Range 30,000 sq. ft. (2,787 sq. m) in single channel mode when using the RX22-4 receiver19,000 sq. ft (1,765 sq. m) in two channel mode when using the RX22-4 receiver 3,350 sq. ft (311 sq. m) in single channel mode when using the RX18 receiver BKT 024 Base 1 2" (50.8 mm) round base with four 0.188" (4.8mm) holes on 1.6" (40.6mm) bolt circle for solid surface mounting Base 2 T-Bar Clip for drop ceiling rails Base Cover Black Vinyl, covers either base Shafts Two 0.5" (12.7mm) diameter, 2" (50.8mm long aluminum, black1/4 - 20 stud with lock ring Head 190° tilt, 360° turn & 360° rotation Finished Lengths 2" (50.8 mm), 4" (101.6 mm) or 6" (152.4 mm) Weight 3 lbs (1.36 kg) CHG 518 Power Supply Input 120 VAC Power Supply 100 - 240V / 12VDC TFP 043 Unit Capacity 5 Units EAR 022 Style Around-ear speaker Plug 3.5 mm mono Driver Size 23 mm Nominal Impedance 32Ω Frequency Response 20 - 20kHz Max Power Input 30 mW Sensitivity 118 dB @ 1kHz Cord 39" (990.6 mm) Weight 0.033 lbs (0.015 kg) IDP 008 Dimensions (H x W x D) 10.375" (263.53 mm) x 6.25" (158.75 mm) x 0.125" (3.175 mm) MOD 232 Power Supply Wall Transformer, 24 VAC, 50-60 Hz, 15VANorth America: TFP 016, UL/CSAEurope: TFP 027-01, 2-pin Schuko plug, CEUK: TFP 027-02, 3-pin UK plug, CE Carrier Frequency Channel A: Selectable, 2.3/2.8/3.3/3.8 MHzChannel B: Selectable, 2.3/2.8/3.3/3.8 MHz Frequency Response 30 to 16,000 Hz, +1 dB, -3 dB, electrical response Audio Processing Compression (slope) adjustable from 1:1 or 2:1Switchable compression gain: Moderate: 16dB. Max: 33dB Phones Output 1/4" TRS headphone jackAccepts stereo, mono and any impedance phones Power Input 3-Pin Molex, 24 VAC, 50-60 Hz, 15 VA Audio Input Jack CHA and CHB combination XLR/TRS jack Mic Level Balanced, Lo-Z, 100 µV min. to 90 mV max., 1 mV nominal, 3kΩ input impedance, supplies switchable simplex power per DIN 45596 for condenser mics Line Level Balanced or unbalanced, 21 mV min. to 10V max., 212 mV nominal, 100 kΩ Audio Line Output Jacks RCA Jack, CHA and CHB, 500 mV, unbalanced, 100 Ω source impedance, load impedance must be greater than1 kΩ Configuration Switches CHA and CHB 8-position DIP switch, selects Mic/Line input, compressor gain, simplex power, discrete or mixed inputs, carrier frequency, channel disable, auto shut-off timer Dimensions (H x W x D) 1.7" (43.18 mm) x 8.5" (215.9 mm) x 8.2" (208.28 mm) Weight 3.1 lbs (1.5 kg) WIR RX18 Battery Type, Life BAT AP11A NiMH battery pack, 7 hours Operating Range Up to 3,063 sq ft (285 sq m) when used with the TX9 emitter or TX90 transmitter in single-channel modeUp to 1,000 sq ft (93 sq m) when used with the TX75 in single-channel mode Modulation Frequency 2.3 MHz or 2.8 MHz or stereo Frequency Response 200 Hz to 8 kHz, ± 5 dB Signal to Noise Ratio 60 dB at 10 m Weight 0.125 lbs (0.057 kg) WIR RX22-4N Carrier Frequency Channel 1: 2.3 MHz, Channel 2: 2.8 MHzChannel 3: 3.3 MHz, Channel 4: 3.8 MHz Signal-to-Noise Ratio 60 dB min. Frequency Response 25 Hz to 16 KHz, +1 dB, -3 dB, electrical response Audio Output Jacks 3.5 mm stereo mini phone jack Accepts 3.5 mm mono or stereo phone plug Audio Output Power 15 mW max at 32 Ω Acoustic Output 125 dB SSPL90 with HED 021; 110 dB SSPL90 w/ EAR 013 Dimensions (H x W x D) 4.1" (104.14 mm) x 2.85" (72.39 mm) x 1.2" (30.48 mm) Weight 0.281 lbs (0.128 kg) WIR TX9 Power Supply Wall Transformer, 24 VAC, 50-60Hz, 35 VA, 3-pin MOLEX ConnectorNorth America: TFP 010, UL/CSAEurope: TFP 027-01, 2-pin Schuko plug, CEUK: TFP 027-02, 3-pin UK plug, CENote: Each WIR TX9 requires its own power supply Carrier Frequency 50 kHz to 8 MHz Emitter IR Power 3.5W Dimensions (H x W x D) 6.25" (159 mm) x 11.25" (285.75 mm) x 2.13" (53.98 mm) Weight 1.9 lbs (0.9 kg) - Documents
Documents
- System Includes
System Includes
- (1) MOD 232 Modulator
- (1) WIR TX9 DC Emitter (with TFP 053 U.S. DC Power Supply)
- (1) BKT 024 Wall / Ceiling Mount
- (3) WIR RX18 Receivers
- (1) WIR RX22-4 Receiver
- (1) EAR 022 Earphone
- (1) CHG 518 Five-Bay Charger
- (1) NKL 001 Neckloop
- (1) RPK 005 Rack Mount Kit
- (2) BAT 001 AA Alkaline Batteries
- (1) IDP 008 ADA Wall Plaque
- Reviews
Write Your Own Review
System Components
-
Williams Sound NKL 001 18" Neckloop with Mono Plug
List $72.00Pro Acoustics Price $59.00Savings $13.00 (18%)