- Description
Details
The Peavey Digitool Live Signal Processor is part of a family of digital audio processing units built on the rich history of the original Digitool MX and designed for the audio professional. These products have the power and flexibility to perform loudspeaker management functions in addition to matrix mixing, room combining and other audio processing functions for installed and portable sound systems. Each model features a full-color display screen, front navigation and editing controls, front panel input and output mute buttons and LED meters to simply configuration. They can also be configured using a Windows application via USB or Ethernet.
- Features
Features
- Full-color, graphic LCD for easy front panel control
- Windows GUI for setup and control
- Front-panel USB "B" port for setup
- Full matrix routing with mute and level control at each cross-point
- XLR input and output connectors on Digitool LIVE
- Input and output filters including: PEQ, hi-shelf, lo-shelf, hi-pass, all-pass and horn-EQ
- Crossover filters to fourth order, including Butterworth, Bessel and Linkwitz-Riley alignments
- Rear-panel Ethernet port for setup
- Delay of up to 2.5 seconds on each input and output with sample period resolution
- Gate and compressor on every input
- 8 CV "control voltage" inputs that can be programmed as level and mute controls
- Compressor/limiter on every output
- Stereo AES input MX16 and LIVE (2 stereo AES inputs on the MX32)
- Digitally controlled analog input and output level controls for maximum dynamic range
- Front panel input and output mute buttons
- 4 audio-triggered, priority mute buses
- 48V phantom power switchable on each input
- Automix capability
- 8 mic/line inputs and 8 line outputs (MX16 and LIVE)
- Signal generator
- Copy/Paste of input and output settings
- 100V to 240VAC 50/60 Hz power inlet
- Preset storage and recall (8 internal preset locations)
- 5-segment LED meters on inputs and outputs
- Firmware can be field updated
- Rear-panel ears and strap for easy cable management
- RS-485 input for external control of level, mute and preset recall
- Specification
Product Type Signal Processor Audio Inputs Circuitry Balanced Max Input Level +24dBu (determined by sensitivity setting) Max Sensitivity for Full Scale -40dBu Source Select Mic/Line, AES-R (even channels), AES-L (odd channels) Sensitivity Settings -39 dBu to +24 dBu in ½ dB steps Input Impedance 24 dBu to -6 dBu sensitivity setting = 10K Balanced (LINE) Input Impedance -7 dBu to -40 dBu sensitivity setting = 2.2K Balanced (MIC) Phantom Power +48V, enabled per channel Crosstalk Better than 70 dB (@ 1k Hz) Common Mode Rejection Better than 70 dB (@1k Hz) Equivalent Input Noise: (EIN) -124 dBu 150 Ohm source. 22 Hz to 22 kHz un-weighted ADC Dynamic Range 109 dB un-weighted;112 dB A-weighted Audio Outputs Circuitry Enhanced servo balanced Maximum Output Level +24 dBu (determined by output level setting) Max Output Level Settings 24 dBu to +24 dBu Output Impedance 100 ohms, balanced, 50 ohms unbalanced DAC Dynamic Range 110 dB un-weighted;113 dB A-weighted I/O Connectors XLR, Pin 2 Hot Analog Input To Output Total Harmonic Distortion < .01% Input to Output, one channel assigned, 22-22k Hz BW Frequency Response 10Hz to 20kHz +/- 0.5% dB Latency 1.7 msec (analog input to analog output) Metering Sixteen 5-Segment Arrays 8 input and 8 output Meter levels (dBFS) -36 dB, -24 dB, -18 dB (GREEN); -12 dB (YELLOW); 0 dB (RED) Digital Internal Sample Rate 48kHz AES Input Sample rate converted. Accepts 24 kHz to 192 kHz sample rates Ethernet 10BaseT/100BaseT, address is DHCP or Static USB 2.0 Full speed, "B" connector CV Inputs 0 to 10V with an external voltage applied, or remote passive potentiometer AC Power Input Voltage 100 VAC to 240 VAC, 47Hz to 63Hz universal power supply Power Consumption 20 Watts Dimensions (H x W x D) 22.2" (563.88 mm) x 21" (533.4 mm) x 6.625" (168.275 mm) Weight Unpacked 22.49 lbs (10.2 kg) Weight Packed 31.31 lbs (14.2 kg) - Reviews
Write Your Own Review