- Description
Details
The ML-800 can control up to 8 rooms with single button ease of use. Room combining is done via the front panel. Additionally, all individual room functions can be performed from the front panel making it possible to set-up and monitor the entire facility from a single location.
Unlike most other systems, ML-800 is truly an out of the box plug and play system. There simply is no programming required or modules to assemble. Attach the wall plates from each room, the mixers and the amplifiers and the ML-800 is ready to go.
The ML-800 goes beyond simple room combining system by providing distribution and control of 4 background music sources as well as paging. In room, control is accomplished with either a membrane wall plate or a color LCD touch screen. The wall plate or touch screen can control the background music source and volume as well as the foreground audio volume. When rooms are combined, any changes made to one room automatically track to all combined rooms. A key switch or security code is built into the wall plate to prevent unauthorized changes from taking place.- Features
Features
- 2 to 8 Room Control
- 4 Background Music Sources
- Contact Closure, AMX/Crestron and Luttron Interfaces Available
- Membrane and Color LCD Touch Wall Plates Available
- Remote Monitor and Map Panel
- Specification
Audio Frequency Response 20 Hz – 20 kHz +/- .5 dB THD .03% @ 1kHz with MAX Rated Input Level MAX Input Level +18 dBm Noise Floor -90 dBm Conditions Mixer Enables ON, Local Inputs ON, Nothing mixed, InputsOpen, Outputs 600 ohm , Volume set to 0 dB Volume Preset -6 dB Crosstalk -95 dB @ 1kHz, -78 dB @10 kHz Any Input to Any Output Mic + Music Volume Control Range +10 dB to – 11 dB (Volume range adjustable from In-room controls) Room Audio Inputs Number and Type 8 mono balanced Connector Used 3 pin Phoenix Impedance 20k ohm MAX Input Level +18 dBm Input Gain 0 dB and +10 dB gain, dip switch selectable (SW 16 on CPU card) Background Music Inputs Number and Type 4 mono balanced Connector Used 3 pin Phoenix Impedance 20k ohm MAX Input Level +18 dBm Trim Level Adjust Range -6 dB to +20dB Paging Input Number 1 mono balanced Connector Used 3 pin Phoenix Impedance 20k ohm MAX Input Level +18 dBm Trim Level Adjust Range -6 dB to +20 dB Output Number and Type 8 mono balanced Connector 3 pin Phoenix Impedance 50 ohms MAX Level +22 dBm into 600 ohms load Power Input Ratings 100 /120 / 220 /240 VAC 50 /60 Hz Max 2A Mechanical Standard 19" rack by four rack units high Wall Plates Standard 2 gang - Reviews
Write Your Own Review