In Ceiling Subwoofers

The Atlas Sound FAPSUB-1 8 inch In-Ceiling Subwoofer adds impressive low frequency response to any full range distributed system.

The QSC AD-C81Tw 8" 70V 8 Ohm Ceiling Mount Subwoofer is designed to supplement audio systems with low-frequency extension, the AD-C81Tw is acoustically matched to the entire AcousticDesign Series. Rated for 100 watts continuous power and 400 watts peak.

The SoundTube CM1001D-T is a 10" blind-mount in-ceiling subwoofer tuned for maximum output and performance across the operating bandwidth. By incorporating a 10" polypropylene woofer and a butyl rubber surround in a tuned and ported enclosure this speaker delivers maximum low-frequency response (41 Hz - 224 Hz, -10 dB) and high SPL (114 dB).

The SoundTube CM1001d-T is a 10" blind-mount in-ceiling subwoofer tuned for maximum output and performance across the operating bandwidth. By incorporating a 10" polypropylene woofer and a butyl rubber surround in a tuned and ported enclosure this speaker delivers maximum low-frequency response (41 Hz – 224 Hz, - 10 dB) and high SPL (114 dB).

The TOA FB-3862CU is a high-performance flush-mount ceiling subwoofer assembly for low-frequency enhancement of distributed loudspeaker systems. A 60W 70/100V transformer is included, and the bandpass design eliminates the need for a bi-amplified system.

The Tannoy CMS 801 SUB PI is specifically designed with a self-aligning 5-way clamp system for fast, simple and cost effective installation and features removable locking screw terminal connector with loop-thru functionality.

The QSC AD-C81Tw 8" 70V 8 Ohm Ceiling Mount Subwoofer is designed to supplement audio systems with low-frequency extension, the AD-C81Tw is acoustically matched to the entire AcousticDesign Series. Rated for 100 watts continuous power and 400 watts peak.

The Tannoy CMS 1201SW is a passive 1,600-Watt subwoofer and is ideally suited for use with the CMS 3.0 range of ceiling monitor systems, or any full range system requiring extended bass response.

Developed from Yamaha's successful VXC8 full-range ceiling speaker, the VXC8S is the first ceiling subwoofer in the VXC range. Designed for background music playback, its band-pass type structure, with a frequency response of 44Hz - 280Hz.

Developed from Yamaha's successful VXC8 full-range ceiling speaker, the VXC8S is the first ceiling subwoofer in the VXC range. Designed for background music playback, its band-pass type structure, with a frequency response of 44Hz - 280Hz.

The Bose FreeSpace FS3 Series II Acoustimass Module is designed to provide flush-mount or surface mount bass augmentation for new and existing background music systems. It features one 5.25" (133 mm) woofer that delivers deep bass down to 40 Hz without audible distortion.

The Bose FreeSpace FS3 Series II Acoustimass Module is designed to provide flush-mount or surface mount bass augmentation for new and existing background music systems. It features one 5.25" (133 mm) woofer that delivers deep bass down to 40 Hz without audible distortion.

The Lowell ES-8TSUB is a self-contained, ready-to-install 8 inch 120-watt in-ceiling subwoofer that produces extended low-frequency response for music when used in combination with other ES Series speakers.

TOA HB-1 flush-mount subwoofer is the ideal solution for adding low frequency enhancement to commercial, residential and retail sound systems. The HB-1's unique minimum-depth design allows discreet flush-mount installation in ceiling structures or in walls between studs spaced on 16" centers.

The Community D10SUB ceiling mount subwoofer provides powerful, high-impact bass response intended to augment any combination of D series full-range models.

The QSC AD-C.SUB is part of the AcousticDesign™ Series SUB/SAT loudspeaker solution, which is ideally suited for background music applications that require depth and clarity even at lower volume settings. The AcousticDesign Series SUB/SAT loudspeakers are specifically designed to be mix-and-match capable; meaning any combination of satellites may be paired with any subwoofer in the AD Series SUB/SAT line.

The QSC AD-C.SUB is part of the AcousticDesign™ Series SUB/SAT loudspeaker solution, which is ideally suited for background music applications that require depth and clarity even at lower volume settings. The AcousticDesign Series SUB/SAT loudspeakers are specifically designed to be mix-and-match capable; meaning any combination of satellites may be paired with any subwoofer in the AD Series SUB/SAT line.

The Electro-Voice EVID C10.1 10 inch High Power In-Ceiling Subwoofer package consists of a bezel assembly, grille, rear enclosure, 10" subwoofer and internal line-matching transformer. The C10.1 utilizes a transformer that offers a selection of 7.5 (70 V only), 15, 30 or 60 watts delivered to the subwoofer system using either 70 V or 100 V lines, or 8 ohm bypass.

The JBL Control 19CST 8-inch in-ceiling subwoofer uses advanced technologies to produce powerful bass from a low profile in-ceiling design.

The Tannoy CMS 801 SUB PI is specifically designed with a self-aligning 5-way clamp system for fast, simple and cost effective installation and features removable locking screw terminal connector with loop-thru functionality.