- Description
Details
The JBL Control 312CS is an excellent addition to JBL Control 321, 322 and 328 loudspeaker systems, or any fullrange loudspeaker system that requires extended bass response. The 300 mm (12 inch driver features a Kevlar-reinforced low frequency cone for reliability, well-damped surround, extended excursion capability, high temperature 75 mm (3 in) voicecoil and reduced distortion through saturatedgap magnet geometry. The Control 312CS is easy to install. The innovative EZRail™ feature built into the metal baffle temporarily holds one side of the speaker baffle in place until the installer can affix the baffle to the backcan with screws. The removable multi-pin locking connector, with secure screw-down terminals, allows for pre-wiring the input wires for easy clip-on convenience during installation.
- Features
Features
- Desinged for systems utilizing an external active subwoofer crossover, separate amplifier channel for the subwoofer loudspeaker
- Includes Kevlar-reinforced 300 mm (12 inch) subwoofer driver woofer with 75 mm (3 inch) voice-coil
- High power handling of 400 Watts with high sensitivity provides high SPL capability
- The innovative EZRail™ feature built into the metal baffle temporarily holds one side of the speaker baffle in place until the installer can affix the baffle to the backcan with screws
- Specification
Frequency Range (-10 dB) 30 Hz-4.5 kHz Frequency Response (±3 dB) 34 Hz-3.5 kHz Long-Term System Power Rating 400 W (1000 W peak), 2 hrs; 250 W (600 W peak), 100 hrs Sensitivity (2.83V @ 1m) 93 dB3 measured half-space Maximum SPL 121 dB cont ave (124 dB peak) Nominal Impedance 8 ohms Driver Kevlar reinforced cone, 75 mm (3 in) voice coil Input Connector Removable locking connector with screw-down terminals Dimensions (H x W x D) 14.4" (366 mm) x 14.4" (366 mm) square baffle x 6.3" (160 mm) depth from back of baffle Net Weight 17 lbs (7.7 kg) Shipping Weight 18.5 lbs (8.4 kg) - Reviews
Write Your Own Review