- Description
Details
The CMS 801sub delivers low frequency extension into applications that require a combination of premium sonic quality and output level for music and speech reinforcement, as well as long-term operating reliability and ease-of-installation.
The 8" (200 mm) driver, with long throw multi fibre paper pulp cone, and a 2nd order 160 Hz passive crossover, are mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94 V-0 ABS material. Spring loaded self-aligning clamps make for quick and easy installation, and each device is supplied with two tile support rails and one C-ring included in the package. A plaster (mud) ring is available as an optional accessory.
Two models variants are available: CMS 801sub BM (blind mount) and CMS 801sub PI (pre-install) - with a steel back can available as an optional accessory for the PI version. The BM model is equipped with a low insertion loss 60W line transformer mounted within the back can. This is easily configurable to various settings via front baffle mounted rotary tapping switch.- Features
Features
- High power and high sensitivity with low distortion
- UV/weather resistant UL94 V-0 ABS front baffle
- Easily accessible tapping switch on front baffle
- Packaged with tile rails and C-ring for quick & easy installation and simple stocking logistics
- Specification
Frequency Response (-3dB) 58Hz - 160Hz Frequency Range (-10dB) 42Hz - 300Hz System Sensitivity (1W @1m) 92 dB (1 W = 2.45 V for 8 Ohms) Rated Maximum SPL Average Average: 112 dB
Peak: 118 dB
Average (with THP60): 110 dBPower Handling Average: 100W
Programme: 200W
Peak: 400WRecommended Amplifier Power 200W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (with optional transformer) 70V: 60W / 30W / 15W / 7.5W / OFF & low impedance operation
100V: 60W / 30W / 15W / OFF & low impedance operationDistortion: 10% Full Power (21.9V) 2nd Harmonic 70 Hz: 1.22%, 100 Hz: 0.38%
3rd Harmonic 70 Hz: 1.90%, 100 Hz: 0.49%Distortion: 1% Full Power (2.45V) 2nd Harmonic 70 Hz: 0.91%, 100 Hz: 0.04%
3rd Harmonic 70 Hz: 1.28%, 100 Hz: 0.44%Transducer 1 x 8" (200 mm) Long throw woofer with multi fibre paper pulp cone Backcan Zinc plated steel Baffle Reflex loaded UL 94 V-0 rated ABS Grille Steel, with weather resistant coating Safety Features Safety ring located at rear of enclosure for load bearing safety bond Clamping Design Security toggle clamp
Min / Max Clamping Range: 0.0mm (0.0") / 20.0mm (0.79")
Recommended Clamp Torque: 1.5NmCable Entry Options Cable clamp & squeeze connector for conduit up to 22 mm Connectors Removable locking connector with screw terminals with "loop through" facility Safety Agency Ratings UL-1480, UL-2043, CE Hole Cutout Diameter 11.61" (295 mm) Bezel Diameter 12.80" (325 mm) Front of Ceiling Surface
to Rear of Speaker Unit4.63" (117.5 mm) Front of Accessory Backcan Bezel
to Top of Safety Loop6.63" (168.5 mm) Net Weight 7.05 lbs (3.2 kg) Shipping Weight (pair) 25.35 lbs (11.5 kg) - Documents
Documents
- In the Box
In the Box
- (2) Ceiling Mount Subwoofers
- (2) C Rings
- (2) Tile Bridges
- (2) Grilles
- Paint Mask
- Cutout Template
- Reviews
Write Your Own Review