- Description
Details
Lowell's LUH-15T 15W Unihorn™ with fine-perf grille (included) or vandal-proof grille (order separately) provides superior installation opportunities and cosmetics for recessed or surface flange-style horns. LUH-15T is a compact universal use re-entrant horn that mounts into 4”D spaces to provide clear intelligibility with high SPL output over the extended vocal range. The ready-to-install package includes a self contained aluminum housing with moisture-seal cover, contoured aluminum trim ring and press-fit aluminum grille with no visible hardware.
The horn is engineered for labor saving installation in brick, concrete block, plaster, drywall and acoustic tile. It mounts indoors or out, using adjustable clamps or screws. It installs with or without a 4"D backbox in recessed or surface applications and provides a finished appearance using the factory mounted trim ring and fine perforated grille included. Although a grille is supplied, the UNIHORN™ will accept a standard 8” screw-mount speaker grille and backbox. Simple 2 wire hook up, dual capacitor circuitry, and 105dB SPL (1W1M) make this horn ideal for standard or supervised paging/signaling applications.
Connections are secured through a rear metal clamp and the 25/70V transformer is screwdriver adjustable on the front and rear. Finish is Network Grey powder epoxy. Weight is 6 lbs. The UNIHORN™ is packaged with its own trim ring and small profile grille for universal indoor and outdoor architectural appeal. The trim ring and grille are not required, but provide a superior cosmetic solution for mounting horns in new and retrofit installations. The cast aluminum trim ring (shipped mounted to the horn) is engineered to snugly fit the fine perforated aluminum screen grille which press fits without screws for a hardware-free appearance. Finish is neutral network grey to match the UNIHORN™.
- Features
Features
- All-in-one package includes an aluminum trim ring/grille
- Fits into a 4”D backbox or no backbox
- Clear and loud paging/music with superior aesthetics
- Installs using clamps or screws into new or retrofit areas
- Has vandal-resistant grille options
- Features dual capacitor circuitry for standard paging or supervised use
- Easy 2-wire hook-up to rear access cable clamp
- Front and rear accessible transformer selection switch
- Weather-resistant assembly for indoor or outdoor use
- Integral seismic tie-off brackets
- Specification
Power Handling Nominal 15 watts RMS (nominal) measured per EIA Standard RS 426-B Sensitivity 110dB SPL (peak) 1W/1M, 105dB SPL (avg) 1W/1M Frequency Response 600Hz-12kHz (nominal), 740Hz-7.4kHz (+6dB) Dispersion Angle 80° @ 2000Hz octave (-6dB) Impedance 5000, 2500, 1300, 666, 333, 89, 45 ohms Capacitor DC blocking series connected (10 uf NP) Outside Size (horn housing) 7.1” (180mm) Dia. housing with 8” (203mm) Dia. face x 3.72” (94mm)D Outside Size (horn with trim ring/grille) 7.1” (180mm) Dia. housing with 9.6” (244mm) Housing Material Cast aluminum with gasketed rear cover Cutout Diameter 7.25 inch (184mm) Trim Ring / Grille Material Cast aluminum / perforated aluminum Mounting Bolt Circle 7.625 inch (194mm) with 4 holes spaced to mount an E.I.A. 8” speaker grille. Dimensions (Dia x D) 8" (203.2 mm) x 3.72" (94.89 mm) Net Weight 6 lbs (2.72kg) - Reviews
Write Your Own Review