The AtlasIED IPDCM+ is an indoor wall mount IP LED display with integrated talkback microphone. It leverages VoIP communication solutions to extend notifications with effective visual text alerts for high ambient noise areas or large spaces.

The AtlasIED IPDCM+ registers as a communication endpoint directly within InformaCast, SA-Announce and GCK Advanced Notification applications, supporting their visual text broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded & scheduled announcements, while leveraging the WAN/LAN Network Architecture.

In addition to visual signaling, the IPDCM+ can provide audio to support distributed analog public address systems with the convenience of line level and amplified audio outputs. This line level output is ideal for use with AtlasIED AA, PA, DPA, or CP series amplifiers to power large zones of traditional 25V, 70.7V, or 100V AtlasIED loudspeakers or paging horn loudspeakers.

In addition to the line level output, the IPDCM+ provides 2-channels of 15-watt RMS at 8-ohm amplified output to drive external loudspeakers. It also includes 2 GPI inputs, 1 GPI output and a microphone input for talk back or listen applications.

Under Title II of the ADA, all state and local governments are required to take steps and ensure effective communication to people with disabilities. The AtlasIED IPDCM+ display with talkback microphone provides effective communication for all individuals.

Ideal for Corporate Applications, Education Institutions, Entertainment Complexes, Industrial Facilities, Government Buildings, Healthcare Facilities, Houses of Worship, Transportation Hubs - anywhere critical alerts / public address needs exist and prefer using a single enterprise-class communications platform.

• Network controlled, high visibility red LED display
• Auto registration and auto provisioning
• 16 x 64 LED dot matrix display
• Multicast-enabled network clock control
• Cisco SRST compliant
• Power using IEEE802.3af compliant PoE switch or local 12VDC-18VDC PSU
• RJ-45 female input on PCB

Data Sheet