- Description
Details
Atlas Sound AA200PHD 6-Input 200W Mixer Amplifier
The AA200PHD is a six input channel mixer amplifier designed for distributed business paging and background music (BGM) systems, medium to large speech privacy systems, and in applications where music on hold (MOH) plus paging is required.With one microphone/line input and two stereo line inputs, the AA200PHD will accommodate a variety of input sources including paging microphones, media players, and digital music receivers. What Sets the AAPHD Series Apart? The AA200PHD includes a patent pending automatic system test, the Push Here Diagnostic® (PHD). The PHD button is designed to check the connected loudspeaker lines for wiring and impedance errors. This test can be activated once all loudspeakers are connected and the circuit automatically verifies that the attached loudspeakers' tap settings do not exceed the amplifier's rated power, no loudspeakers are mistakenly tapped at 8Ω, and the loudspeaker wire is free from shorts.
What Sets the AAPHD Series Apart?
The AA200PHD includes a patent pending automatic system test, the Push Here Diagnostic® (PHD). The PHD button is designed to check the connected loudspeaker lines for wiring and impedance errors. This test can be activated once all loudspeakers are connected and the circuit automatically verifies that the attached loudspeakers' tap settings do not exceed the amplifier's rated power, no loudspeakers are mistakenly tapped at 8Ω, and the loudspeaker wire is free from shorts.
The unit also incorporates a Remote Input Selection and Remote Level Control feature that allows the integrator to use a remote wall plate (AtlasIED model WPD-RISRL) and allow the user to select the input and adjust the volume from that wall plate up to 200 feet from the amplifier.
The AA200PHD provides 200-watts output power into 25V, 70.7V, or 4Ω loudspeaker systems. Rear panel DIP switch allows for creation of Zone 2 output mix using any or all of inputs 1-4. Unit can also be set-up to mute Inputs 2 through 6 on signal from Input 1 for paging applications where other input sources need to be muted during a page. Inputs 1-4 are either Mic or Line input selectable and Phantom Power is an option when using them as a microphone input.
- Features
Features
- 200W into 25V/70.7V and 4Ω Loads
- Automated Diagnostic System Test (Push Here Diagnostic®)
- Four Balanced Mic/Line/Tel Inputs w/ Phantom Power
- Input Assignable Zone 2 Output
- Remote Level Control
- Remote Input Select (RIS)
- Line Output
- Preamp In for External Processors
- Variable Mute Sensitivity Control for Input 1
- Contact Closure Mute Terminals
- Optional Rack Mount Kit Available - Model AARMK2-0
- Specification
RoHS Compliant Yes Safety Listings ETL (UL 60065 Standard) Power Output Max. Average Power @ 50Hz-15kHz with .5% THD, 4Ω 200W RMS Transformer Outputs 25V: 200W RMS 70.7V: 200W RMS 4Ω: 200W RMS Front Panel Power Switch Push Type Indicators Signal, Peak, Limit, Power PHD Test Circuit Push Momentary Level Controls Master, Inputs 1-6 Rear Panel Inputs Mic / Line Balanced Qty 4, 3 Position PHX Type. 3.5mm Pitch Auxiliary Unbalanced Qty 2, RCA Auxiliary Unbalanced Qty 1, 3.5mm Amp In: Unbalanced RCA 600Ω Tone Controls Bass ±6dB @ 100Hz Treble ±6dB @ 10kHz Mute VOX Sensitivity: Pot Rotary, Range (–) 500uV +/-200uV Remote Mute: Contact Closure, 2 Position Phoenix, 3.5mm Pitch Remote Level Type 10V DCV Return Connector 4 Position Phoenix 3.5mm Pitch Control Port Input 2 Input 4, 5, 6 or DIP Switch Assigned Master Supply Port 10VDC Send Ground Port Ground Remote Input Select (RIS) Type Ground Activated Connector 4 Position Phoenix 3.5mm Pitch Inputs Controlled 4, 5, 6 Control Switch Functions Zone 2 Assign Inputs 1, 2, 3, 4 Mute Receive Inputs 1, 2, 3, 4, 5, 6 Phantom Power Inputs 1, 2, 3, 4 Mic/Line Select Inputs 1, 2, 3, 4 Remote Level Assigned Master or Inputs 4, 5, 6 RIS On/Off Outputs Main Transformer Coupled, Balanced, 4Ω, 25V, and 70.7V. Class 2 Rated, Removable 4 Position PHX 5.08mm Pitch, Accepts up to 12 -24 Gauge Wire, 12A Rating Zone 2 Unbalanced 600Ω/ 10kΩ, Max 1.0V Out, Removable 2 Position PHX 3.50 Pitch, Accepts up to 18 - 26 Gauge Wire, 8A Rating Pre Out RCA, Unbalanced 150Ω Technical Data Inputs Total Qty 4 Frequency Response 50Hz - 15kHz +/- 3dB Thd+N 0.5% or Less, at 1kHz, Rated Output Input Sensitivity/ Impedance Input 1, 2, 3, 4 - Mic Mode 5mv, No Trim, 1200Ω Input 1, 2, 3, 4 - Line Mode 316mV (-10dBV) 1200Ω Input 4 - 3.5mm Summed, 3, 4 316mV (-10dBV) 10kΩ Input 4, 5, 6 - RCA Unbalanced Summed 316V (-10dBV) 10kΩ Signal to Noise Ratio Mic >55dB Line >55dB Telephone >55dB Input 5, 6 >75dB Phantom Power 24VDC Power Requirements AC Mains 120V 60Hz AC Cord 2M, 18 Gauge, NEMA 5-20P Idle Power .07A, 6W, 39 BTU Average Power .28A, 30W, 101 BTU Max Power .86A, 89W, 303 BTU Mechanical Chassis Steel Finish Black Paint on Front and Top Dimensions (H x W x D) 3.66" (93 mm) x 16.54" (420 mm) x 14.6" (422 mm) Weight 26 lbs (11.79 kg) Shipping Weight 29.5 lbs (13.38 kg) - Documents
Documents
- Reviews
Write Your Own Review