Conference Room Sound System

This Conference Room Sound System includes 6 SoundTube CM500i 5.25" in-ceiling and 2 SM500i-II-WX 5.25" surface mount speakers, 7 Shure MX395 in-table boundary microphones, a Crown CDi 1000 power amplifier, Shure SCM810 automatic mixer, Shure SLX14/93 wireless lavalier microphone system, DBX DriveRack PA2 loudspeaker management system and cables. This complete system is the ideal set up for Large Conference Rooms, Training Rooms, Meeting Rooms and Presentations where low-profile installation boundary microphones are desired.

SoundTube CM500i 5.25" In-Ceiling Speakers

Patented BroadBeam® waveguide technology delivers a consistent dispersion pattern for maximum intelligibility and edge-to-edge coverage. One 5.25" polypropylene woofer and one 1" convex titanium tweeter with FerroFluid cooling mounted to a proprietary cast-aluminum baffle and heat sink. Rapid-installation, blind-mount, fixed- wing mounting mechanism with constant-tension design affixing to ceiling thicknesses ranging from 0.25" (6.4 mm) to 1.91" (48.5 mm). Easy-access six-position selectable tap switch for 25-, 70.7- and 100-volt applications with transformer bypass position. Separate tool-free magnetic grille and bezel assembly with integrated safety cable for ease of install and in-field painting. WX-EnviroGuard™ magnetic grilles provide protection from water and other harsh conditions with extreme rust resistances while still maintaining the ability of the magnetic attachment. Average sensitivity of 86.5 dB offers high-output capabilities and reduced amplification costs. UL 1480 (UEAY) and 2043 approved. Included accessories: tile bridge, conduit plate, Euroblock connector and paint mask.

SoundTube SM500i-II-WX 5.25" High Power Surface Mount Speakers
 
The SoundTube SM590i-II-WX 5.25” High Power Surface Mount Speaker has a high-power output for long throw and high SPL requirements. It has one 5.25" polypropylene woofer and one 1" horn-loaded convex titanium dome tweeter mounted to a proprietary cast-aluminum baffle and heat sink. Its 87 dB average sensitivity offers high output capabilities and reduced amplification costs. Includes weatherized components for indoor/outdoor applications. Easy-access, six-position selectable tap switch for 25-, 70.7- and 100-volt applications with transformer bypass position. Aluminum grille with powder-coat finish. Includes a tool-free SpeedLeverTM captured ball mounting system for a fast and secure installation. Vertical and horizontal pivoting offer precision aiming for indoor and outdoor applications. Pan and tilt capabilities. CE approved. Included Accessories: Corrosion-resistant captured ball mount, safety cable, Euroblock connector and terminal weather boot.

Crown CDi 1000 Power Amplifier

The CDi Series amplifiers are professional tools designed and built for installed sound applications. Rugged and lightweight, this power amplifier offers unmatched value in its class. The CDi Series amplifiers feature an intuitive front-panel LCD screen to guide installers through their configurations. CDi amplifiers also offer onboard DSP for loudspeaker signal processing. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan-assisted cooling, removable Phoenix-style inputs, barrier strip outputs for low-Z or 70V/140V loads, short-circuit protection and more.

Shure MX395 Microflex Low Profile Boundary Microphones

The Microflex® Low Profile Boundary microphone is an ideal table microphone when minimal presence is of high priority. Perfect for meeting rooms, these microphones deliver exceptional sound pickup while barely being noticed. Choose from a selection of colors and pickup patterns for customized table installations.

Shure SCM810 8-Channel Automatic Mixer

This eight-channel automatic mixer features the Shure patented IntelliMix®, which activates only microphones being addressed, minimizing poor audio caused by multiple open microphones. The SCM810 is designed specifically for installed sound applications.
Features include adjustable EQ per channel, 48V phantom power, active balanced microphone - or line-level inputs, line-level outputs, highly RF resistant chassis and circuitry, complete logic control of microphone activation, linking capacity for up to 400 microphones, with an internal power supply. 120/230 Vac power.

Shure SLXD124/85 Combo Wireless Handheld and Lavalier Microphone System

Your performance should never be in question. Whether presenting, educating, praising or entertaining, your relationship with your audience is singular. With the Shure SLXD124/85 digital wireless handheld and lapel microphone system you can stand confidently on a strong foundation and build the wireless installation to match ongoing demands, from day-long conference to nighttime performances.

DBX DriveRack PA2 Loudspeaker Management System

With the latest advancements in dbx's proprietary AutoEQ™ and AFS™ algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android®, iOS®, Mac®, or Windows® device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.

SoundTube CM500i 5.25" In-Ceiling Speakers:

• BroadBeam® waveguide technology delivers a consistent dispersion pattern up to 10 kHz for maximum coverage area per speaker (EASE™ documented)
• One 5.25" (133 mm) polypropylene woofer and one 1.0" (25 mm) convex aluminum tweeter with FerroFluid™ cooling mounted to a proprietary cast aluminum M5™ baffle and heat sink
• Rapid installation blind-mount, fixed wing mounting mechanism with constant tension design affixing to ceiling thickness tolerances ranging from 0.25" (6.4 mm) to 1.69" (42.9 mm)
• Separate tool-free magnetic grille & bezel assembly for ease of install & in-field painting
• Iridite-plated steel grille with protective powder-coated finish for lasting durability
• Easy access 6-position selectable tap switch for 25, 70.7 and 100 Volt applications with voice coil/8 Ohm direct simplifies ordering & inventory tracking
• 88.5 dB average sensitivity offers high output capabilities & reduced amplification costs
• UL 1480 rev. 5 & 2043, CE (EMC Directive 89/366/EEC, EN55020, EN55013 & IEC529 approval pending. Milspec 810 approved
• Included accessories: Tile bridge, Euroblock connector & paint mask
• Optional accessories: Pre-Construction Bracket, Junction Box and Square Grille for architectural specifications
• High-quality black or white paint finish. Custom paint colors optional
  
  

SoundTube SM500i-II-WX 5.25" High Power Surface Mount Speakers:

• WX Weather Guard Technology - keeps water from damaging the speaker's drivers and internal electronics
• Patented ZeroReflection enclosure technology for optimal sound reproduction and cabinet rigidity
• Aluminum grille with powder-coat finish
  
  

Crown CDi 1000 Power Amplifier:

• Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs
• Switch-mode universal power supply
• Intuitive front-panel LCD screen for quick, easy configuration
• Onboard digital signal processing includes crossovers, EQ filters, delay and output limiting
• Up to 20 user defined DSP presets are available
  
  

Shure MX395 Microflex Low Profile Boundary Microphones:

• Only 1.25" (3.8 cm) in diameter
• Cardioid, omni and bidirectional polar patterns
• Wide dynamic range and smooth frequency response
• Available in black, white and aluminum
• Bi-color status indicator available with -LED models
• Logic input for remote LED control
• CommShield® Technology
  
  

Shure SCM810 8-Channel Automatic Mixer:

• Eight balanced mic-line input channels (Phoenix block connectors)
• One unbalanced 1/4" aux level input
• Eight unbalanced 1/4" direct line level outputs
• One balanced master line level output (Phoenix block connector)
• Selectable 46V phantom power per channel
• Level selectable peak output limiter
• Full rack width (single rack height)
  
  

Shure SLXD124/85 Combo Wireless Handheld and Lavalier Microphone System:

• Extended 20 Hz to 20 kHz frequency range (microphone dependent)
• 120 dB dynamic range
• Digital predictive switching diversity
• 44 MHz tuning bandwidth (region dependent)
• 32 available channels per frequency band (region dependent)
• Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
• Easy pairing of transmitters and receivers over IR scan and sync
• Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
  
  

DBX DriveRack PA2 Loudspeaker Management System:

• All New Setup Wizard
• Streamlined AutoEQ™
• All New AFS™ (Advanced Feedback Suppression)
• Mobile Control (Android®, iOS®, Mac®, Windows®)
• dbx Compression
• Graphic EQ
• 8-Band Parametric EQ (adjusted when using the AutoEQ) Input
• Subharmonic Synthesis
• Crossover (supports full range, 2-way, and 3-way systems)
• 8-Band Parametric EQs (used for speaker tunings) Output
• dbx Limiting
• Driver Alignment Delays

• (6) SoundTube CM500i 5.25" In-Ceiling Speakers
• (2) SoundTube SM500i-II-WX 5.25" High Power Surface Mount Speakers
• (1) Crown CDi 1000 Power Amplifier
• (7) Shure MX395 Microflex Low Profile Boundary Microphones
• (1) Shure SCM810 8-Channel Automatic Mixer
• (1) Shure SLXD124/85 Combo Wireless Handheld and Lavalier Microphone System
• (1) DBX DriveRack PA2 Loudspeaker Management System
• (7) CBI MLN 25ft XLR Microphone Cables
• (3) CBI MLN 3ft Prep-Male XLR Cables
• (3) CBI MLN 3ft Prep-Female XLR Cables
• (500 ft) West Penn 225 Audio Speaker Cable