- Description
Details
The AP-S15RTHR 15A Half Width Rack Power Conditioner with Remote Activation is a compact conditioner, designed to fit into Atlas half width equipment racks and meets installation requirements for AC power distribution and equipment power protection. It offers power management control, remote activation, 24VDC 2000mA output, noise filtering, spike/surge protection and six AC outlets. It features noise filtering for unwanted Radio Frequency Interference (RFI) and Electromagnetic Interference (EMI). The benefit of these filters can be seen on video products and heard audibly by reduced static pops and external signal interference.
By using one of the optional Atlas WPD wall plate switches that feature a custom label area and remote status LED, it can be remotely activated by using dry contact closure or via a 5V – 24VDC voltage . The AP-S15RTHR also features a 24VDC 2000mA DC output that works in conjunction with the switched AC Outlets. This 24VDC output provides enough current to power several Time Saving Device (TSD) preamps, mixers or amplifiers reducing or eliminating the need for external DC power supplies.
For fire alarm requirements an Emergency Power Down function (EPD) can also be created by using the Remote Activation feature, by keeping the Remote Activation contact closed until a condition occurs that requires a system shut down. When the contacts are open, it will remove power from the switched outlets. It uniquely allows you to select the power cord length required for installation. A removable 12' IEC power cord with a retainer bracket is supplied. The AP-S15RTHR can be mounted in a half width rack, or rack mounted into 19" equipment racks by using the optional PA702RMK kit. This kit allows you mount an AP-S15RTHR by itself or in conjunction with another Atlas half width rack product such as the DPA-102PM, PA40G/PA60G, or MA40G/MA60G in a 19" 1RU space- Features
Features
- Half Width Rack Design 8.5" Wide with Removable Rack Ears
- Circuit Breaker Protection @ 15A
- 6 Total Outlets , 4 Rear Panel Switched
- Removable IEC Power Cord with a Retainer Bracket
- Remote Activation via Latched Dry Contact Closure or DC Voltage or EPD (Emergency Power Down) to Integrate with Fire Control Panels
- RFI and EMI Noise Filtering
- Earth Ground Fault Connection Indicator
- Power Switch Cover
- 24VDC 2000mA DC Output
- Specification
Front Panel Load Rating 15A / 12A AC Outlets 5 Outlets Total Remote Activation Latching Type Dry Contact Closure or 5V-24VDC Remote Activation Connector 4 Position 3.5mm Phoenix Type Connection 24VDC 2000mA Output 4 Position 3.5mm Phoenix Type Connection AC Mains IEC Power Socket 15A 1800W Max AC Mains Current 15A AC Mains Breaker Operating Voltage 102VAC - 132VAC Power Consumption 8 Watts Noise Attenuation RFI 10dB @ 10kHz / 40dB @ 100kHz / 100dB @ 10MHz Temperature Range 5° – 35°C Humidity Range 5% to 95% Relative Humidity Chassis Finish Black Mounting Half Rack Mount Dimensions (H x W x D) 1.75" (44.5 mm) x 8.5" (215.9 mm) x 8" (203 mm) Weight 5.5 lbs (2.49 kg) - Reviews
Write Your Own Review