- Description
Details
The PGXD14 is Digital Series Wireless Instrument System. Includes PGXD4 Wireless Receiver, PGXD1 Bodypack Transmitter and WA302 Instrument Cable.
The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired. True digital diversity means two antennas and two independent receivers are constantly working to provide rock-solid RF signal, and one touch scan finds a clear frequency instantly, making set up a snap.
Powerful yet compact, the PGXD1 transmits wireless audio from instrument or microphone sources with pure digital clarity and rock-solid reliability.
Instrument cable connects the T1, UT1, SC1, PG1, PGX1, PGXD1, SLX1, LX1, ULX1, UC1, UR1, UR1M and U1 body-pack transmitter to a guitar or other instrument.- Features
Features
- PGXD4 Features:
- 24-bit / 48kHz digital technology for incredibly accurate sound.
- Automatic frequency selection locates a clear channel instantly.
- One-touch sync automatically syncs the transmitter and receiver.
- True digital diversity for rock-solid wireless signal reliability.
- Up to 5 compatible channels per frequency band.
- 1/4" and XLR audio outputs.
- Included padded carrying case for portability and protection.
- PGXD1 Features:
- Rugged, compact bodypack with belt clip.
- 20 Hz – 20 kHz frequency range captures every nuance of tone.
- Power, mute, and battery status LED.
- 200 ft (60 m) operating range.
- Up to 10 hours of continuous use from 2 AA batteries.
- Recessed dial on side provides 26 dB of continuously adjustable gain.
- Lockable interface prevents accidental setting change.
- WA302 Features:
- 2.5 foot (.75 m).
- length with 1/4-inch plug.
- 4-pin mini connector (TA4F) (supplied with instrument systems).
- Specification
PGXD4 Audio Output Level (ref. ± 38 kHz deviation, 1 kHz tone) XLR connector (into 3000 Ω load): -2.5 dBV, 1/4 inch connector (into 10000 Ω load): +10 dB Impedance XLR: 50 Ω, 1/4 inch: 50 Ω Sensitivity -102 dBm @ 10-5 BER Image Rejection > 70 dB, typical Housing ABS XLR Output Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio Audio LED Red: 2 dB below clip, Amber: 12 dB below clip, Green: 50 dB below clip Power Requirements 12-18 Vdc at 150 mA, supplied by external power supply Pin Assignments XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4") TRS: Tip=audio, Ring=no audio,Sleeve=ground Dimensions (W x H x D) 7.125 in x 1.6 in x 4.1 in (181 mm x 40 mm x 104 mm) PGXD1 Audio Input Level +10 dBV maximum, at minimum gain setting, -16 dBV maximum, at maximum gain setting Gain Adjustment Range 26 dB Input Impedance 1 M ohms RF Output Level RF Output Level 10 mW maximum (dependent on applicable country regulations) Housing Molded polycarbonate case Power Requirements 2 AA batteries Battery Life Up to 10 hours Dimensions (W x H x D) 2.50 x 4.25 x 0.75 in. (64 mm x 108 mm x 19 mm) Weight 128 grams (4.5 oz.) without batteries WA302 Foot 2.5 foot (.75 m) Connector 1/4-inch plug and 4-pin mini connector (TA4F) - System Includes
System Includes
- (1) PGXD4 Receiver
- (1) PGXD1 Bodypack Transmitter
- (1) Guitar Cable
- (1) Power Supply
- (2) AA Batteries
- (1) Carrying Case
- (1) User Guide
- Reviews
Write Your Own Review