When you need to add 3 mics to a mixer, which only has one available channel, the ART ProMIX Microphone Mono Mixer is your solution. All you have to do is nsert a ProMIX between the mics and the mixer. Each mic channel on the ProMIX has both phantom power and low-frequency cut selectable via DIP switches plus a level control. The balanced XLR line output can be connected to a mic input on the mixer and headphones or a powered monitor can be connected to the Phone/Aux output. And if AC power is not available, the ProMIX runs on batteries as well.

• 3 low-impedance XLR mic channels
• 3 level controls
• 3 phantom power on/off DIP switches
• 3 low-frequency cut on/off DIP switches
• A low-impedance balanced XLR line output
• Mono 1/4" Phones/Aux. output
• Clip LED (fires 3dB below the onset of clipping)
• On/off Power switch with LED
• Output Phantom Power: 12V DC
• Optional 2 x 9V Battery Power yields 18V Phantom Power