The CSS-H30 paging horn is a cost-effective CSS Commercial Solutions Speaker, designed for the needs of a wide range of commercial applications.
Designed for demanding environmental conditions, the JBL CSS-H30 is highly weather resistant (IP-65 rated) so it can be used in either indoor or outdoor applications. The focused coverage pattern allows the horn to project the sound a farther distance than is the case with wider-coverage paging horns.
Constructed of sturdy ABS with corrosion‐resistant all-stainless-steel mounting bracket and hardware, this paging horn includes a built‐in UL registered multi‐tap transformer (30‐Watt) for use with 70V and 100V distributed speaker lines, with a screwdriver adjustable tap switch, and a bypass position for direct 8-ohm operation.
Typical applications for this product are public access areas, warehouses, factories, schools, recreational facilities, commercial buildings, distribution centers, civic centers, and other commercial sound and protective signaling systems.
| Frequency Response (-10 dB) | 380 Hz – 6 kHz |
|---|---|
| Coverage Pattern | 50° Horizontal by 70° Vertical (at 2 kHz and Averaged 1 kHz – 4 kHz) |
| Included High-Pass Filter | Passive 350 Hz High-Pass Filter Built-in |
| Directivity Factor (Q) | 15.8 (2 kHz) |
| Directivity Index (DI) | 12 (2 kHz) |
| System Power Rating | 30W (120W peak), 100 hours |
| Sensitivity (1W, 2.83V@ 1m) | 108 dB, Ave. 1 kHz – 6 kHz 112 dB at 1.4 kHz |
| Maximum SPL (1m)(8Ω Setting) | 123 dB cont Ave. (129 dB peak), 1 kHz – 6 kHz; 127 dB cont Ave. (133 dB peak), 1.4 kHz, 30W input |
| Nominal Impedance | 30W/70V, NC/100V tap: 167 ohms 15W/70V, 30W/100V tap: 333 ohms 7.5W/70V, 15W/100V tap: 667 ohms 3.8W/70V, 7.5W/100V tap: 1333 ohms 1.9W/70V, 3.8W/100V tap: 2666 ohms 8 ohms at 8 ohm direct setting |
| Transformer Taps | 70V: 30W, 15W, 7.5W, 3.8W, 1.9W 100V: 30W, 15W, 7.5W, 3.8W |
| Driver | 1.5" Diameter with Phenolic Diaphragm |
| Horn Material | ABS |
| Mounting Hardware | Stainless steel powder-coated U-bracket (yolk) with 3 x 0.41" Diameter Mounting Holes |
| Color | RAL9016 (Horn and Bracket) |
| Input Connection | 12" Pigtail to Bare Wire; Entrance Via Watertight Fitting |
| Environmental | IP-65 Rating Per IEC529, Salt Spray Per B117, Stainless Steel U-bracket and Exterior Hardware |
| Safety Agency | Transformer UL Registered per UL1876 "Isolating Signal and Feedback Transformers for Use in Electronic Equipment" |
| Dimensions (Horn) | 8.2" (206 mm) x 11.2" (285 mm) x 11.3" (287 mm) |
| Weight | 4.5 lbs (2 kg) |
| Shipping Weight | 6 lbs (2.7 kg) |
Usually arrives in 5-9 business days.
