AC Power Sequencers

The Merit M-8S power sequencer is the perfect low-cost AC power solution for any rack mount system. Install an M-8S in your rack, and the eight outlets in the rear panel will power up in sequence and protect all your equipment up to a 15-amp load.

The SEQ-8 is a compact low voltage 8-step sequencer combines with low voltage remote power controls and switches to provide time delayed activation and deactivation of AC powered equipment on site or in a remote location. Sequence delay is screwdriver...

Furman CN-15MP 15A MiniPort Furman's Contractor Series MiniPorts extend the benefits of SmartSequencing to electronics outside of the equipment rack, providing tremendous flexibility to any installation scenario. Units may be daisy-chained and fully...

Furman ASD-120 2.0 6 Circuit Sequencing Power Distribution (6) 20A 120V Circuits, 240V or 3-Phase 208V Input Updated for easier installation and operation, the ASD-120 2.0 is a compact rack-mount power distribution system for use where AC power...

RX Series Surge Protection in a Twenty Amp, Three Step Sequencer The CQ 1520-RX combines reliable AC power sequencing with the proven performance of the Juice Goose RX Series surge protection and filtration.Each CQ Series product contains the circuitry...

Juice Goose RC DM1 Remote Alarm Connection for CQ Series Power Sequencers In order to silence an audio system in the event of an emergency, the RC DM1 provides an interface between a latching, dry contact on an alarm panel and a Juice Goose CQ Series...

ART PS8-II Professional 9-Outlet Power Sequencer The PS8-II provides controlled power sequencing to 8 rear AC outlets. Each output is delayed by a fixed amount that is determined by the front panel Sequence Delay control. This allows you to control the...

The Middle Atlantic USC-6R is a rackspace universal sequencing controller. Sequencing up and down is controlled locally via integral front system switch with switch guard or remotely via single pole, double throw, center off, momentary switch. The USC-6R...

Designed for Commercial A/V Installers, the CN-2400S combines robust control capabilities via SmartSequencing™ Technology, advanced AC protection, AC noise filtration, and optional compatibility with the BlueBOLT® Remote Power and Energy...

Slim (1U) 19”W rackmount panels feature 15A power outlets and a four step sequencer for time-delayed activation/deactivation of equipment directly plugged into the six (6) switched outlets. Three (3) additional outlets are unswitched (always on)...

This is a great product for "front of house" applications or anywhere AC power protection is needed for several pieces of low current equipment that need to be controlled and sequenced. It provides superior AC line conditioning and surge...

A single rack-space unit, the SEQ-1U features two always-on receptacles and 4 programmable banks. There are three physical banks of 2 receptacles each and a fourth ‘virtual’ bank for controlling remote units, allowing for infinitely...

The Atlas Power ECM-2063 AC Power Distribution Sequencer Raceway System is designed to offer the installer/contractor current requirement flexibility based on the needs of the equipment that will be connected to the raceway. The ECM-2063 accepts up to...

Atlas Sound ECM-20 20A AC Power Conditioner and Spike Suppressor The Atlas Power ECM-20 is a 20A Power Conditioner and AC Spike Suppressor that is designed to be used as a standalone unit or in conjunction with an ECS unit up to 1000ft away. The ECM-20...

The Lowell SEQR-8 8-channel rackmount power sequencer is low voltage, 8-step sequencer provides time-delayed activation and deactivation of equipment connected to a remote power control (order separately). Full sequence or Alternate Sequence Mode (ASM)...

AtlasIED ECS-3 Power Sequencer and Conditioner The Atlas Sound ECS-3 has been designed to meet most installation requirements for AC power distribution and equipment power protection. The 15A compact 1 RU unit features three sequential timing sections...

Furman PS-REL AC Relay Accessory Designed for PS Series Power Conditioners Sequencers Instead of being operated manually like the RS-1, PS-REL has a relay that detects the presence of AC power. In response, closes relay contacts that are wired to a...