Ashly Audio

The Ashly MX-206 is a unit shall be a six input stereo microphone mixer with TRS stereo outputs as well as a transformer-isolated +24 dBm , 600 ohm balanced XLR mono output.

The Ashly KLR-2000 Power Amplifier has been optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000-2500 Watts per channel at 2 Ohms the KLR-2000 is perfectly suited for a wide range of sound reinforcement.

The Ashly KLR 3200 high-performance power amplifier is optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000 to 2500 Watts per channel at 2 ohms the KLR 3200 is perfectly suited for a wide range of sound reinforcement.

The Ashly MX-406 Stereo Mic/Line Mixer is a rack-mountable six-input, stereo mic/line mixer designed to be used in fixed or portable installations. Each input will accept either microphone or line-level signals. If microphones are used, a -20dB pad switch is available.

The Ashly MX-508 Mic/Line Mixer is an 8-input stereo rackmountable mixer. Designed for many applications, it has an extensive mix of features for a small unit combined with excellent sound and quiet performance.

The Ashly Pema 4125 DSP processor features a new sleek look, 4-channel at 125 watts per channel at 4Ω. The Pema is a matrix mixer with 8-in x 8-out, where any input can be assigned to any output or outputs.

The Ashly Pema 4250 DSP Processor is a Protea-Equipped Media Amplifier—either 4-channel at 250 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs. Pema is a digital signal processor.

The Ashly Pema 8125 DSP Processor with it's new sleek look, is a Protea-Equipped Media Amplifier is an 8-channel at 250 Watts or 125 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs.

The Ashly Pema 8250 DSP Processor is a Protea-Equipped Media Amplifier. It features 8-channesl at 250 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs.

The Ashly WR-1 is an assignable, dual potentiometer remote volume control for the controlled product. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board, which in turn must be wired to the 24.24M back panel euroblock connector labeled "0 - 5 Volt Remote Level Control".

The Ashly WR-2 Multi-Function Wall Network Remote Volume Control allows selection of one of four presets via interlocking pushbutton switches. Each pushbutton switch connects to a euroblock on the rear of the controlled product.

The Ashly WR-1.5 volume control fits in standard wall boxes and used low gauge wire for hook-up. It has a single potentiometer for remote level control, plus a 4-position rotary switch for preset recall. The remote level control uses DC voltage provided by the host unit to attenuate one channel of that unit.

Control your system from any location with the Ashly WR-5 Programmable Multi-Function Decora Wall Remote Control. This device fits in standard wall boxes and uses low gauge wire for hook-up. WR-5 is a programmable remote button controller for Ashly amps and processors that have a serial data connector.

The Ashly TM-335 is a mixer and 35W mono power amplifier for applications that require public address, background music and/or paging.

Control your system from any location with this Network Enabled remote control. The neWR-5 is a programmable remote button controller for Ashly Network Enabled amps and processors.

Control your system from any location with this wall-mountable RRW-8C wall-mountable programmable remote fader controller for Ashly amps and processors that have DSP and a serial data connector.

The Ashly TM-360 is a 3-input, 60 watt unit that offers input and output flexibility coupled with energy efficiency. It uses a Class-D amplifier topology for added energy efficiency.

The Ashly FA-125.2 is designed for easy and flexible placement, to go where other amps cannot: Under conference tables, behind displays, inside kiosks...anywhere high-quality reliable power is needed, but space is limited. The FA Series is that neat audio magic trick that gives your project the performance you need...without the bulk, heat, and power-consumption you don't.

The Ashly FA-125.4 is designed for easy and flexible placement, to go where other amps cannot: Under conference tables, behind displays, inside kiosks...anywhere high-quality reliable power is needed, but space is limited. The FA Series is that neat audio magic trick that gives your project the performance you need...without the bulk, heat, and power-consumption you don't.

The Ashly SRA-2075 power amplifier is an advanced, efficient amplifier that is perfect for installations with modest power requirements. Housed in a compact single rack space chassis and weighing only 10 lbs, and designed to drive 4 or 8 ohm loads.