Microphone Antenna Accessories

The Shure UA221 Antenna Splitter/Combiner Kit includes two adapters that can be used as one-input, two-output or two-input, one-output passive antenna splitter/combiners for UC4, SLX4, ULXS4, ULXP4,...

RF Venue DC-OCTOPUS 8-Connector Power Distribution Cable The DC-OCTOPUS is a professional 8-connector power distribution cable designed to simplify rack power management for wireless audio systems...

RF Venue WRG8X25 Low Loss Coaxial Cable The WRG8X25 is a premium 25-foot white low-loss coaxial antenna cable engineered for professional wireless audio applications. Built in the USA, this 50Ω RG8X...

RF Venue DFIN-IPXW Diversity Fin IPX Directional Diversity Antenna The RF Venue Diversity Fin IPX is a weather-resistant directional antenna designed to deliver stable and reliable RF performance for...

The DFIN Cover is a black padded canvas cover to protect the DFIN diversity fin antenna.

RF Venue RG8X25 Low Loss Coaxial Cable The RG8X25 is a premium 25-foot black low-loss coaxial antenna cable engineered for professional wireless audio and RF applications. Built with 50Ω RG8X cable...

The DFIN-PARTS-KIT Diversity Fin stand-mount parts kit contains (2) mounting blocks with hardware and (6) whip antennas with BNC male connection.

RF Venue RG8X50 Low Loss Coaxial Cable  Coaxial cabling can make the difference between flawless RF performance and total system failure. Even the slightest crimp or ding in the coaxial cable can...

RF Venue ILAMP-ACT In Line Amplifier This in-line amplifier is designed to compensate for signal loss on long coax runs. One in-line amplifier can compensate 10dB of cable attenuation which is about...

Use the 2x1Split to make an 8 channel IEM combiner, create a distributed antenna system, or to tap into your spectrum analyzer to get more insight into your setup. The 2x1SPLIT is intended for use...

The Shure UA825 is a BNC-BNC RG8X/U type coaxial cable and is 50 ohm and 25 ft long (7.5 m).

Connecting cable from PS to SR. The cable for connecting antenna power splitters with receivers shall be an RG 58 cable (50 Ohms), length 0.6 m, gold plated BNC connectors on both ends.

The UA834XA provides more flexibility in wireless installations by increasing the allowable length of cable runs between a receiver and antenna. Antennas may be placed closer to the stage, or...

AB4000 EW is a high-performance antenna booster to compensate signal loss on long antenna cables. One AB4000 EW can compensate 3.5 to 17.5 dB of cable attenuation. Up to two boosters can be cascaded...

The APS-1 is a 2:1 antenna splitter or combiner. This is a great solution to combine or distribute simple 2-up systems set-ups of BTR-800 or BTR-700. The APS-1 can be used with any UHF Telex...

Antenna bulkhead connector kit consists of two BNC-BNC bulkhead-type connectors with mounting hardware and two 3' RG-58 BNC-BNC cables. Permits extension of wireless antenna connection locations to...

RF Venue 2 Channel Remote Antenna Kit for Wireless Microphones The 2 Channel 1/2 Wave Antenna Kit from RF Venue contains everything needed for smaller wireless microphone installations. The kit...