- Description
Details
The Definition Install iW63 DC is a flush fitting in-wall sealed cabinet loudspeaker of exceptional acoustic performance. Accurate, articulate and detailed, the iW63 DC uses Tannoy’s highly regarded Dual Concentric driver technology and twin 165 mm (6.50”) auxiliary bass drivers to deliver a thrillingly engaging sound. Ideal for use as rear channel speakers in surround sound systems that major on clarity and imaging, the iW63DC is equally at home in width, height or overhead channel positions.
The high-power, high sensitivity configuration means the iW63 DC can handle 200Watt program material and 400Watt peaks, comfortably producing over 110dB for long periods if required. The 165 mm (6.50”) Dual Concentric driver offers exceptional clarity and resolution and Wideband frequency response to over 40kHz. The auxiliary bass drivers deliver additional punch and power, allowing the iW63 DC to reach deep bass notes down to 54Hz.
The 11.5 litre iW63 DC cabinet is designed to fit standard 400mm (14.00”) joist spacing and is only 94mm deep. It comes supplied with an innovative isolating mounting system, comprising four rubber turrets on sliding brackets, to make installation simple and decouple the speaker from the building structure. This significantly reduces sound energy transfer into other rooms in the building and further improves clarity and intelligibility at the listening position.
An optional pre-install mounting frame is available to further simplify installation. Finished in a durable textured black pain finish the iW63 DC comes supplied with a flush-fitting white paintable metal grille complete with acoustically transparent foam backing for visually critical positions.- Features
Features
- 165 mm (6.50”) high sensitivity, point source and constant directivity Dual Concentric™ drive unit (music mode)
- Two 100 mm (6.50”) Dual Concentric™ drive units in dipole configuration (cinema mode)
- Constant time delay over the frequency spectrum
- Exceptional transient performance
- 90 degree conical dispersion (music mode) 120 degrees horizontal by 90 degrees (cinema mode)
- Superior harmonic alignment
- Natural, clean and integrated sound
- Enhanced intelligibility, sound staging and dynamics
- Recommended amplifier power 100 to 200 W @ 8 Ohms
- Sensitivity 90 dB (1 W = 2.83 V for 8 Ohms)
- Maximum SPL 117 dB average
- Rugged construction MDF closed enclosure, internally braced and finished with textured black paint
- Isolation mounting system minimises energy transfer to the wall material
- Optional pre-installation frame available
- Specification
Frequency Range 54Hz - 40kHz System Sensitivity (1W @1m) 91dB (1W = 2.83V for 8 Ohms) Nominal Coverage Angles 90 degrees conical Coverage Angle (1kHz to 6kHz) 120 degrees Directivity Factor (Q) 3.5 averaged 1kHz to 6kHz Directivity Index (DI) 5.5 averaged 1kHz to 6kHz Rated Maximum SPL Average: 111dB,Peak: 117dB Power Handling Average: 100W, Programme: 200W, Peak: 400W Recommended Amplifier Power 100 - 200W @ 8 Ohms Crossover 320Hz, 1.5kHz Nominal Impedance 8 Ohms Distortion 10% Full Power (8.94V) 2nd Harmonic 250Hz: 0.18%,1kHz: 0.89%,8kHz: 1.30% 3rd Harmonic 250Hz: 0.08%,1kHz: 1.05%,8kHz: 0.18% 1% Full Power (2.83V) 2nd Harmonic 250Hz: 0.90%,1kHz: 0.39%,8kHz: 0.54% 3rd Harmonic 250Hz: 0.38%,1kHz: 0.61%,8kHz: 0.55% Transducers Low Frequency 2 x 165mm (6.50") woofers Mid and High Frequency 1 x 165mm (6.50”) constant directivity Dual Concentric™ Construction Enclosure 11.5 litre, closed and internally braced MDF enclosure with integral isolation mounting system Connectors Gold plated spring terminals Dimensions (H x W x D) 23.23" (590 mm) x 13.58" (345 mm) x 3.70" (94 mm) Weight 23.14 lbs (10.5 kg) - Reviews
Write Your Own Review