- Description
Details
The high-tech enclosure uses injection-molded high-impact polypropylene to make the ZX1i extremely durable. The enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small cabinet loudspeakers and enables exceptional low-frequency response without vent noise.
ZX1i installation is incredibly simple with the included QuickSAMTM mounting system. The QuickSAMTM is a unique, integrated mounting bracket which is virtually foolproof. It allows the installer to simply snap the speaker onto the bracket, then tighten it to the desired position. For array mounting, there is an optional array bracket kit available which allows multiple units to be mounted together for a variety of configurations.
Zx1i uses a special circuit that when in transformer mode the network re-configures itself to a current actuated Hi-Pass filter at the transformer primary. It gently rolls off the lowest frequencies to maintain a safe load on the amplifier without affecting the higher (vocal) frequencies and the program continues without interruption. Low frequency current is limited through the transformer eliminating low frequency saturation. Automatic Saturation Compensation allows many speakers to be run on a distributed line with a 50Hz Hi-Pass filter before the amplifier, regardless of the number of speakers on the same line (the number of tapped watts cannot exceed the amplifier rating). With the same 50Hz Hi-Pass, 10 speakers on transformers will have the same full sound as a single speaker at 8 ohms.- Features
Features
- Indoor/outdoor design.
- Ideal for installed mains, fills or distributed sound.
- Velocity-compensated port for exceptional LF.
- Long-excursion weather-treated EV8L woofer.
- 1.25-inch DH2005 titanium HF compression driver.
- Choice of 90º x 50º or 100º x 100º rotatable horn.
- Passive crossover with full-band overload protection.
- Also available in 70/100 volt transformer version with Electro-Voice PATENTED ASC™ Automatic Saturation Compensation.
- High sensitivity, 123 dB maximum SPL.
- Power handling: 200 W continuous, 800 W peak.
- Compact high-impact polypropylene enclosure.
- Integrated QuickSAM™ heavy-duty Strong-Arm Mounting bracket.
- Paintable black or white finish.
- Specification
Frequency Response (-3 dB) 60 Hz - 20 kHz Frequency Range (-10 dB) 48 Hz - 20 kHz Axial Sensitivity 94 dB (1W/1m) Max Calculated SPL 123 dB Rec. Hipass Frequency 40 Hz Horizontal x Vertical Coverage 90° x 50° Rated System Power 200W Cont.², 400W Prog., 800W Peak LF Transducer EV8L, 8 in (203mm) Driver HF Transducer DH2005, 1 in. (25.4mm) ExitCompression Driver Crossover Frequency 1.7 kHz Nominal Impedance 8 Ohms Minimum Impedance 6 Ohms Connectors 4-Pin Phoenix Connector Enclosure Material High Impact Polymer Suspension Integrated QuickSAMTM Heavy-DutyStrong-Arm Mounting Bracket Grille Polyester Powder Coated, 18GAGalvanized Steel Dimensions (H x W x D) 451mm x 282mm x 263mm(17.75" x 11.12" x 10.35") Net Weight 8.4 kg (18.5 lbs) Shipping Weight 10.2 kg (22.5 lbs) - Reviews
Write Your Own Review