- Description
Details
Biamp Devio CR-1 Conference Room Dock System with DTM-1 Tabletop Beam Tracking Conferencing Microphone
The Devio CR-1 creates a desktop-like experience away from the desk, allowing you to make an easy transition to the meeting room simply by detaching your laptop from your desk and connecting to Devio via USB 3.0 in the meeting room. Devio’s included beamforming DTM-1 microphone provides 360-degree coverage to capture in-room audio. Optional support is provided for a second DTM-1 microphone via daisy-chained connection. Connecting to Devio extends your desktop to one or two displays and offers multiple USB ports for attaching computer peripherals like a web camera for video conferencing. With the laptop handling the connection to conferencing systems, Devio works easily with a host of conferencing solutions including Microsoft Skype for Business (Microsoft Lync®) and Microsoft Skype®, Citrix GoToMeeting®, Cisco WebEx®, and Google Hangouts™.
- Features
Features
Devio CR-1:
- USB 3.0 input for single-cable audio/video connectivity
- Integrated DisplayLink USB graphics technology enables connecting to two displays over USB (requires installation of DisplayLink driver on laptop)
- Pass-through HDMI connectivity for driverless connection to display
- Acoustic Echo Cancellation
- Auto setup
- Automatic gain control
- Speaker connectivity includes built-in 20W amplifier or RCA line-out
- Devio System Administration Utility (SAU) and support for SNMP device management over corporate network
- Includes mounting bracket for under–the-table installation
- Ships with one tabletop or one ceiling beamforming microphone with 360-degree coverage and the ability to add an additional microphone of the same type
Devio Beamforming Microphone:
- Eight-element microphones
- Active beamforming technology
- Three 120-degree zones for 360 degrees of coverage
- Automatic voice tracking
- LED mute status indicator
- Two selectable directivity modes (DTM-1)
- Four selectable elevation angle modes (DCM-1)
- Capacitive touch mute button (DTM-1)
- Mounting plate for secure installation (DTM-1)
- Simple installation process includes quick microphone height adjustment (DCM-1)
- Additional RJ-45 for daisy-chained connection to an additional microphone
- Covered by the Devio CR-1 two-year Biamp Systems warranty
- Specification
CR-1 Front Panel Connectors Upstream USB 3.0 Port
(Type B Male Connector)USB connectivity from computer to Devio CR-1 for audio and video, DisplayLink USB graphics technology enables connection to two displays 2 Downstream USB 3.0 Ports
(Type-A Female Connector)Two USB 2.0/3.0 ports for attaching additional peripherals to the computer HDMI Input Port Enables driverless, pass-through video connection from computer to one in-room display via Devio CR-1 Rear Panel Connectors 24V DC Input Locking connection for Devio CR-1 60W inline power supply Ethernet (RJ45) 10/100/1000Base-T Ethernet network connection 2-pin Phoenix Connector 20W powered output speaker connection 4-pin Phoenix Connector For bridging in-room telephone into audio conferences via headset jack (sidetone must be disabled) Line Out (RCA) Alternative connection to self-powered speakers (mono signal on both channels) MIC Out (RJ45) Cat-5/5e/6 cable connection to Devio DTM-1 tabletop microphone 2 HDMI Output Ports Supports video output to up to two in-room HDMI-equipped displays Downstream USB 2.0 Port Additional USB 2.0 peripheral connection (ideal for USB Camera) Line Output Full Scale Level +8.5 dBu Frequency Response (20 Hz-20 kHz @ FS) +0/-0.25 dB Dynamic Range 95 dB A-Weighted (THD+N < 0.01%) THD+N (20 Hz-10 kHz, 20 kHz BW) @ FS <0.011% Signal to Crosstalk Ratio (20 Hz-20 kHz) @ FS 85 dB (one channel driven) Power Amplifier Continuous Output Power 20W into Rated Load Impedance < 0.025% THD+N Rated Impedance 8 Ω to 4 Ω (short circuit protection) Frequency Response (20 Hz-20 kHz @ 20W) +0.2/-0.5 dB THD+N @ 1 kHz, 1W (20 kHz BW) <0.02% Dynamic Range 97 dB A-Weighted (THD+N < 0.025%) Headset I/O Full Scale Level +1 dBu Frequency Response (200 Hz-20 kHz @ FS) +0.5/-0.5 dB THD+N (1 kHz-10 kHz, 20 kHz BW) @ FS < 0.05% Dynamic Range 80dB A-Weighted (THD+N < 0.05%) USB Audio Sampling Rate and Bit Rate 48 kHz, 16 bit System Administration Utility Capabilities Remote/networked-based CR-1 device access and management, install firmware updates, perform Auto Setup Supported Video Resolutions 640 x 480p / 60Hz 4:3
720 x 480p / 60Hz 4:3
1280 x 720p / 60Hz 16:9
1920 x 1080p / 60Hz 16:9
720 x 576p / 50Hz 4:3
1280 x 720p / 50Hz 16:9
1920 x 1080p / 50Hz 16:9USB Device Charging Up to 5W, requires USB connection to computer Dimensions (H x W x D) 1.82" (46 mm) x 11.19" (284 mm) x 6.88" (175 mm) Weight 2.05 lbs (0.93 kg) DTM-1 Microphone Microphone Technology 8-Element Digital Array Frequency Response 150 Hz - 16kHz (+3dB/-3dB) Polar Pattern Active Beamformed Sensitivity > 70 dB @ 1kHz (94 dBSPL, A-weighted) Maximum SPL @ .5% THD 106dBSPL Dynamic Range 92 dB A-Weighted (THD+N < 10%) Power Requirements <1W, Phantom Powered Connector 1 x RJ45 (in) / 1 x RJ45 (out) Automatic Noise Suppression 4 modes: Off, Low (Default), Medium, High Operating Temperature 0° to 45° C / 32° to 113° F Humidity Range 0% to 95% RH non-condensing Mute Switching 3 Capacitive Touch Mute Buttons Indicators Mute Indicator (Green/Red LED) Digital Interface Custom/Proprietary Required Cable Standard 4-pairs UTP (minimum Cat-5) Node to Node Max Distance 49.2 ft (15 m) from CR-1 to DTM tabletop microphone, and for daisychained connection from first to second DTM-1 Dimensions (H x W x D) 2.79" (56 mm) x 5.13" (130 mm) x 4.75" (121 mm) Weight 0.6 lbs (0.27 kg) - Documents
- System Includes
System Includes
- (1) Devio CR-1 Dock
- (1) Devio DCM-1 Tabletop Microphone and Kit
- Reviews
Write Your Own Review