Wired Microphone Accessories
- List $79.00Price $59.00Savings $20.00 (25%)The Rolls MS20c Splitter, Combiner and Isolator will split a single balanced XLR signal into two isolated signals, combine two balanced XLR signals together into a single or simply isolate a balanced line for buzz or hum elimination. Learn More
- List $79.00Price $59.00Savings $20.00 (25%)The Rolls PB23 is for powering a phantom powered microphone with either 12 or 48 VDC. The unit uses a 100kHz switching power supply to eliminate noise generated by common power supplies and has a pull-down resistors so it will work with any mixer. Learn More
- List $79.00Price $59.00Savings $20.00 (25%)The ROLLS MS111 is a general purpose muting switch for microphones. It is configurable to be Push to Mute, Release to Mute, Push ON and Push OFF maintained contact. It is the only switch of this kind we know of and is the result of many requests. Learn More
- List $79.00Price $59.00Savings $20.00 (25%)The Rolls MM11 Pro MicMute is a simple device designed to temporarily mute or talk a balanced XLR signal. Very similar to the MM11, but the "PRO" version has push to talk or push to mute switch that allows to unit to do just that. Learn More
- List $99.00Price $79.00Savings $20.00 (20%)The Rolls PB223 is for powering phantom powered microphones with either 12 or 48 VDC. The unit uses a 100kHz switching power supply to eliminate noise generated by common power supplies and has a pull-down resistors so it will work with any mixer. Learn More
- List $99.99Price $89.99Savings $10.00 (10%)
The ART ProSplit Transformer Isolated Mic Splitter provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct output to the main or Front-of-House mixer, with the second isolated output being sent to a monitor or recording mixer.
Learn More - List $119.00Price $99.00Savings $20.00 (17%)The Rolls PB224 is perfect for any condenser microphone, the new PB224 powers even the high-current draw microphones. The unit features a complete redesign in the voltage supply circuits, offering a rock solid 48 volts of clean phantom power. Learn More
-
The Switchcraft RMAS1 is a passive 3-way transformer isolated microphone splitter ideal for sending a single balanced audio input to 3 unique destinations.
Learn More -
The Whirlwind SPLIT 6 Line Level Parallel Splitter features 1 female XLR input wired to 6 male XLR outputs. Use this handy box when you need to split a line level signal up to 6 times.
Learn More -
The ProCo Model CDSS "Short Stop" Momentary Microphone Muting Switch is a simple microphone signal muting device that offers clean reliable performance with any balanced or floating low-impedance (150 ohm nominal) microphone or signal source.
Learn More -
The ProCo Model CDSO "Sign Off" Latching Microphone Muting Switch is a simple microphone signal muting device that offers clean reliable performance with any balanced or floating low-impedance (150 ohm nominal) microphone or signal source.
Learn More - The Whirlwind SP1X2 provides one input and one isolated output from a mic level input. Each transformer isolated output on these devices features a ground lift switch. Learn More
- The Radial HotShot DM-1™ is a dynamic microphone switcher with a momentary toggle footswitch, allowing an artist on stage to redirect a vocal mic to feed the stage monitoring system and communicate with band members or technicians. Learn More
-
The Whirlwind SP1X3 provides one direct and two isolated outputs. Each transformer isolated output on these devices features a ground lift switch.
Learn More -
The ProCo Power Mute is an active muting switch that can be used in momentary-switch mode or in latching-switch mode, selectable with switches found inside the battery cover. When the LED light is green the microphone is On, and red when Off.
Learn More -
The ProCo Panic Button Microphone A/B and Muting Switch is an active microphone signal routing device that offers clean reliable performance with any balanced or floating low-impedance (150 ohm nominal) microphone or signal source.
Learn More -
The Radial HotShot 48V is a condenser microphone switcher built for silent operation on stage, allowing an artist to power their vocal mic and reroute it to feed the stage monitoring system for communicating with other band members or technicians at the press of a footswitch.
Learn More - The Radial OX8-r is a high-performance 8-channel 3-way mic splitter that is equipped with an input and three outputs: a direct feed for 48V phantom return, an auxiliary feed with ground lift switch and a transformer isolated output. Learn More
- The Radial OX8-j is a high-performance 8-channel 3-way mic splitter that is equipped with an input and three outputs: a direct feed for 48V phantom return, an auxiliary feed with ground lift switch and a transformer isolated output. Learn More
-
With today's tech-savvy concertgoers demanding more and more from the professional sound engineer, the need to increase flexibility and functionality have never been greater. That's why the MIDAS Research and Development team have expanded upon the existing Microphone Splitter format to bring you the DL231.
Learn More