- Description
Details
Shure WB98H/C Clip-On Wireless Instrument Microphone
The Shure WB98H/C (the wireless version of the BETA®98H/C) is a premium cardioid condenser instrumental microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.
- Features
Features
- The WB98 H/C feature transformerless preamplifier circuitry which improves linearity across the full frequency range
- The pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise
- Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments
- The WB98H/C features a 1.6 m (5.3ft) high-flex cable terminating in a 4-pin mini-connector, for use with wireless bodypack transmitters
- Tailored frequency response for open, natural sound reproduction
- Compact, lightweight construction provides a low degree of visibility
- Gooseneck, ratcheting swivel joint and gooseneck angle brace allow for optimum placement and fixed positioning
- Legendary Shure ruggedness and reliability
- Specification
Type Condenser (electret bias) Frequency Response 20 to 20,000 Hz Output Level Open Circuit Voltage: -59 dBV/Pa (1 mV) typical; 1 Pa = 94 dB SPL (at 1,000 Hz) Maximum SPL 2.5 kilohm load: 160 dB, 1 kilohm load: 156 dB (20 Hz to 20 kHz, less than 1% THD) Preamplifier Output Clipping Level 2.5 kilohm load: + 6 dBV (2.0 V), 1 kilohm load: + 2 dBV (1.26 V) (20 Hz to 20 kHz, less than 1% THD) Dynamic Range 125 dB (max SPL minus A-weighted noise) (at 20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load) Output Noise 35 dB SPL, A-weighted Signal-to-Noise Ratio 59 dB re 94 dB SPL Output Impedance Rated at 150 ohms (actual) Recommended minimum load impedance: 1 kilohm Hum Pickup -7.5 dB equivalent SPL in 1 mOe field (60Hz) Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Phantom Power 48 Vdc +/- 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3 Microphone Case Matte black enamel brass case and stainless steel inner grille Preamplifier Case Matte black enamel finished steel Dimensions (Dia x L) Microphone: 0.46" (11.7 mm) x 1.40" (35.6 mm)
Preamplifier: 0.79" (20 mm) x 3.89" (99 mm)Weight Microphone: 0.4 oz (12 g) Less Cable
Preamplifier: 3.4 oz (96 g)- Documents
Documents
- Reviews
Write Your Own Review