- Description
Details
Featuring an all tube preamp and power amp, the 6505® MH authentically produces the much loved tones of the legendary Peavey 6505 in a small, portable package.
The 6505® MH has two channels that follow the same gain structure and voicing of its big brother! The channels share EQ, lush reverb and an effects loop. Channels, crunch, effects loop and reverb are all footswitchable.
T.S.I.™ tube monitoring constantly lets you know that your power tubes are in good shape, and if not, which ones need to be replaced.
The back panel of the 6505 MH is full of modern technology, including Peavey's exclusive MSDI output, USB recording output, headphone output, speaker defeat switch, plus a built-in power attenuator!
- Features
Features
- 2x EL84 power tubes and 3x12AX7/ECC83 preamp tubes
- Two footswitchable channels with 3-band EQ
- Footswitchable crunch on Rhythm channel
- Footswitchable reverb
- Footswitchable buffered effects loop
- Tube Status indication (T.S.I.™) circuit
- MSDI™ Output with XLR and ground lift switch
- USB output
- Speaker defeat switch
- Headphone output
- Attenuator switch for 20 watts, 5 watts, or 1 watt output power
- Footswitch included
- Impedance switch for 16 or 8ohm cabinets
- Specification
General Rated Power 20 W(rms) into 8 or 16Ω Power Consumption (Domestic) 90 W, 50/60 Hz, 120 VAC Tube Complement 2 x EL84, 3 x 12AX7/ECC83 Preamp Input Impedance Very High-Z, 1MΩ USB Output Level Dependent on controls but -6dB (+/-3dB) at full power Equalization Custom Low, Mid, & High passive EQ Effects Send Low Impedance To High-Z, 22kΩ or greater Nominal Output Level 0 dBV, 1.0 V(rms) Effects Return Impedance High-Z, 100kΩ Designed Input Level Physical Dimensions (H x W x D) 7.25" (185 mm) x 14.00" (356 mm) x 7.75" (197 mm) Weight 17 lbs (8 kg) - Reviews
Write Your Own Review