- Description
Details
Available in standard white or black finish, the powerful and versatile C SERIES CP6 provides high quality paging and musical performance. It is designed for open architecture spaces or any location where a stylish pendant form factor is desired. Uniform voicing throughout the C SERIES means that the CP6 can be combined with other members of the Commercial Design product family without compromising consistency from zone to zone. Community’s proprietary Tru-Phase™ waveguide produces a consistently wide conical polar response up to 16 kHz. The genuine coaxial design uses separate magnets for the LF and HF drivers for reduced distortion and industry leading sensitivity, thereby permitting up to 3 dB greater output level while requiring up to half the amplification power of competing products. An easy-access selector switch is conveniently located on the face of the loudspeaker for selectable 8 ohm or 70V/100V operation, while an integrated rear cover hides all wiring and hanging hardware for an aesthetically pleasing installation.
- Features
Features
- Stylish, contoured contemporary pendant design
- High intelligibility with exceptional uniform coverage
- Same components and voicing as the Commercial Design ceiling and surface mount loudspeaker family
- Consistent, wide dispersion up to 16 kHz
- True coaxial loudspeakers with HF compression drivers
- Tru-Phase™ high-frequency waveguide
- Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
- External loop-through Euroblock connectors
- Integrated rear cover hiding all wires and hanging hardware
- Face-mounted adjustable tap position selector switch
- Selectable 8 ohm or 70V/100V operation
- ETL listed to comply with UL1480
- Specification
Operating Range 70 Hz - 13.5 kHz (-10 dB) Frequency Response 100 Hz - 12.5 kHz (-3 dB) Max Input Ratings (8 ohm) 60W continuous, 150W program; 21.9 volts RMS, 43.8 volts momentary peak Transformer Taps 70V: 30W, 15W, 7.5W, 3.75W and 8 ohm selectable
100V: 30W, 15W, 7.5W, and 8 ohm selectableSensitivity (1W/1m) 91 dB SPL (100 Hz to 12.5 kHz 1/3 octave bands); 91 dB SPL (250 Hz to 4 kHz speech range) Maximum Output 8Ω: 109 dB SPL / 115 dB SPL (peak)
70V: 106 dB SPL / 112 dB SPL (peak)
100V: 106 dB SPL / 112 dB SPL (peak)Nominal Impedance 8 ohms Minimum Impedance 7 ohms @ 10 kHz Nominal Coverage 120º conical (1 kHz to 6 kHz ±65°); 120° conical (500 Hz to 6 kHz ±65°) Axial Q / DI 5.04 / 7.03, 500 Hz to 6 kHz Crossover Frequency 2 kHz Recommended Signal Processing 90 Hz, at 24 dB/Oct high pass filter Drivers LF 1 x 6.5" cone; HF 1 x 3/4" exit compression driver Driver Protection Self-resetting solid state circuit breaker Input Connection Two 2-pole Euroblock connectors Controls Front-face wattage / low impedance selector switch Enclosure UL 94V-0 rated ABS plastic, matte finish, paintable Finish Black or white Grille Powder coated steel with safety line, white or black finish, paintable Baffle Reflex loaded UL 94V-0 rated ABS Safety Features Included safety cable. Each cable has an SWL of 99 lbs (45 kg) Safety Agency Ratings ETL listed to comply with UL1480 and CSA60065. Suspension system and Gripple® brand cable fastener listed per UL1598 and UL2239, TUV and CSA Class 3426-01 and Class 3426-81 Dimensions (H x Dia) 13.63" (346.2 mm) x 10" (254 mm) Net Weight 8.1 lbs (3.7 kg) Shipping Weight 11 lbs (5 kg) - Documents
Documents
- Reviews
Write Your Own Review