Accessories
-
Audix MICROBOOM840 84" Carbon Fiber Boom and Clutch Assembly Only (No Microphone or Cable Included) - Black
The Audix MicroBoom84 Carbon Fiber 84" Boom arm (microphone not included) can be used with any of the Audix award-winning Micros™ Series of miniaturized condenser microphones. The MicroBoom is ultra lightweight and able to attach to any microphone stand, making it a great problem solver for portability and hard-to-reach miking applications including choir, live theater, and orchestra. -
Radial Engineering Catapult TX4M 4-Channel Cat 5 Audio Snake with 4 XLR INs and 4 XLR Mic-Level Isolated OUTs (Transmitter)
The Radial Catapult TX4M is a four-channel snake that is designed to route four channels of mic-level signal across long distances using shielded Cat5/Cat6 cable, doing so with little to no signal degradation. -
Listen Tech LA-466 Dante 2-Channel Analog Output XLR Adapter
The Listen Tech LA-466 Dante 2-channel output XLR adapter lets you drive analog line-level products from any Dante-connected network.
List $426.99Price $426.00 -
Whirlwind Mini 12 MS-12-M-NR Low Profile Audio Drop Snake
The Whirlwind MS-12-M-NR Mini 12 Low Profile Audio Drop Snake is also available with a Whirlwind W1 multipin disconnect. -
Atlas Sound ECS-3 Power Sequencer and Conditioner
The Atlas Sound ECS-3 has been designed to meet most installation requirements for AC power distribution and equipment power protection. The 15A compact 1 RU unit features three sequential timing sections that can be activated via the unit, or remotely. Front panel activation is via a momentary switch, while rear activation is via a momentary contact closure, or by 5-24VDC trigger feed.
List $754.99Price $604.99Savings $150.00 (20%) -
Atlas Sound ECS-6RM AC Sequence Controller and Monitor
The Atlas Sound ECS-6RM AC Sequence Controller and Monitor has been designed to meet most installation requirements for AC power distribution, equipment power conditioning and surge suppression protection.
List $842.99Price $675.99Savings $167.00 (20%) -
Switchcraft RMAS8C Dual Isolated Mic Splitter
The Switchcraft RMAS8C is a rack-mounted, 8 Input, 24 output 3-Way Split, Dual transformer isolated audio splitter.
-
Switchcraft RMAS8 Dual Isolated Mic Splitter
The Switchcraft RMAS8 is a rack-mounted, 8 Input, 24 output 3-Way Split, Dual transformer isolated audio splitter.
-
CBI ES16-10/10 16-Channel EarSplitter In-Ear Monitor Splitter Snake with Two 10ft Splits
In ear monitor systems have become a standard for touring musicians. Most commonly utilizing a small rack that holds all of the wireless transmitters, signal processing and a rack mount mixing board. The CBI ES16-10/10 EarSplitter can be built using only two rack spaces which split the signal to both monitors and front of house. -
Radial Engineering OX8-r 8-Channel 3-Way Splitter with Radial Transformers
The Radial OX8-r is a high-performance 8-channel 3-way mic splitter that is equipped with an input and three outputs: a direct feed for 48V phantom return, an auxiliary feed with ground lift switch and a transformer isolated output. -
Radial Engineering OX8-j 8-Channel 3-Way Splitter with Jensen Transformers
The Radial OX8-j is a high-performance 8-channel 3-way mic splitter that is equipped with an input and three outputs: a direct feed for 48V phantom return, an auxiliary feed with ground lift switch and a transformer isolated output. -
CBI ES32-10/10 32-Channel 4U EarSplitter In-Ear Monitor Splitter Snake with Two 10ft Splits
In ear monitor systems have become a standard for touring musicians. Most commonly utilizing a small rack that holds all of the wireless transmitters, signal processing and a rack mount mixing board. The CBI ES32-10/10 EarSplitter can be built using four rack spaces which split the signal to both monitors and front of house. -
MIDAS DL231 24 Input 24 Output Active Microphone Splitter with Microphone Input Preamplifiers
With today's tech-savvy concertgoers demanding more and more from the professional sound engineer, the need to increase flexibility and functionality have never been greater. That's why the MIDAS Research and Development team have expanded upon the existing Microphone Splitter format to bring you the DL231.