- Description
Details
Designed for the most critical, ultra-low noise installations, the P-2400 IT is a symmetrically balanced power conditioner, providing unparalleled AC noise reduction and 100% isolation from the power grid for the lowest noise floor possible.
The P-2400 IT features over 80 dB of common-mode and over 50 dB of differential-mode noise reduction for recording, mastering, and broadcast studios, or anywhere noise-free performance is critical. With 100% isolation from line, neutral, and ground, the P-2400 IT is also ideal for breaking AC ground loops without rewiring or hiring an electrician.
The P-2400 IT features a specially wound and shielded toroidal balanced isolation transformer specifically designed to reduce hum pickup by sensitive equipment when ultra-low-noise is a must. Additionally, Furman’s revolutionary Series Multi-Stage Protection (SMP) featuring our Extreme Voltage Shutdown (EVS) circuits, and our exclusive Linear Filtering Technology (LiFT) combine to ensure what our customers have grown to expect from Furman - uncompromised protection and purification.
Symmetrically Balanced Power
For the most critical, low-noise applications, Furman’s Symmetrically Balanced Power provides an invisible noise floor, while completely breaking ground loops without dismantling equipment or rewiring. This noise reduction is extraordinarily efficient and linear across a huge frequency range. The transformer has completely re-worked your incoming AC and the result is perfectly clean power devoid of the masking effects of AC noise with 100% isolation from line, neutral, and ground.
Unmatched Protection
Furman’s SMP and EVS circuitry safeguards equipment from transient voltage events (such as surges and spikes), as well as sustained overvoltage conditions (commonly caused by wiring faults), for complete and comprehensive protection of sensitive equipment.
Innovative Convenience and Monitoring Features
The P-2400 IT’s front panel LED window displays incoming voltage or output current, with ”Protection OK”, ”Extreme Voltage” and color-coded ”Voltage Range” indicators for comprehensive power monitoring. A front panel USB outlet charges most personal media devices and cell phones right at your equipment rack.
- Features
Features
- Symmetrically balanced power virtually eliminates common mode noise for the lowest noise floor possible.
- Furman’s exclusive SMP technology provides the highest level of surge & spike protection available.
- LiFT offers AC power filtering to ensure clean power for unequaled audio & video clarity.
- Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.
- Protection OK, Extreme Voltage and color-coded voltage range indicators provide information on power quality and operational status of unit.
- Large LED voltmeter/ammeter displays incoming voltage and output current draw.
- Isolated outlet banks minimize inter-component interference and noise contamination.
- Front panel USB convenience outlets allows you to charge most media devices or power a USB lamp.
- 20 amp rating featuring a high inrush magnetic circuit breaker for added protection.
- 14 total outlets (twelve rear panel outlets and two front panel convenience outlet).
- Specification
Maximum Current 20 amps Line Cord 12AWG X 3, 10FT long, NEMA 5-20 plug Operating Voltage 90 to 139 VAC, 60 Hz Over-Voltage Shutdown 140 VAC Nominal Spike Protection Mode Line to neutral, zero ground leakage Spike Clamping Voltage 188 VAC peak @ 3,000 Amps Response Time 1 nanosecond Maximum Surge Current 6,500 Amps Noise Attenuation Transverse Mode Noise 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz Common Mode Noise 80 dB @ 20 kHz, 40 dB @ 20 kHz to 1MHz Receptacles 10 Ultra-low resistance isolated-ground hubbell outlets, 2 GFCI front panel outlets Power Consumption 26 watts (for display and control circuits) Dimensions (H x W x D) 5.25" (133 mm) x 19" (483 mm) x 14" (356 mm) Weight 90 lbs (41 kg) - Documents
Documents
- Reviews
Write Your Own Review