- Description
Details
State of the art surge protector with auto-reset over/under voltage protection and remote power control is ideal for a wide range of applications. Model ACSPR-RPC1-1509(K) is ETL Listed in the US and Canada to UL Standard 60065. It is a 15A device that provides safeguarded power distribution from a slim rackmount chassis with three unswitched outlets and six switched outlets that can be remotely controlled. The 19"W x 1-3/4"H (1U) surge suppression device with remote power control and over/under voltage protection features multi-color LEDs for easy visual identification of system status. Termination is by a nine foot cord with NEMA 5-15P plug. Unit is offered with rocker or key switch activation.
- Features
Features
- The surge suppressor is UL1449 third edition and ANSI C62.41 compliant
- VTE circuitry with auto-reset is designed to turn all receptacles off when line voltage exceeds 140V or drops below 100V for circumstances such as extended line voltage rises or sags. Following a voltage tolerance shutdown event, the unit will automatically restore power to the receptacles when the unit detects acceptable line voltage. If the shutdown event was a power outage, the switched receptacles will remain off until reactivated
- Remote power control circuitry (RPC) allows for on/off control by external DSP timed events. Termination blocks on the rear are available for connecting remote switches (momentary) and remote triggers (maintained) for on/off functions. An integral override termination block is also included for life safety system applications where fire code mandates an alarm interface
- Integral override facilitates use in life safety applications where fire code mandates an alarm interface
- Rocker-switch or key-switch activation
- Specification
General Power Rating 120VAC, 60Hz, 15A 1800W Actuation Switch Front panel rocker or keyswitch with momentary contacts (normally open SPST) plus rear barrier strip termination blocks for momentary (normally open) remote switches and DSP timed events External Trigger Voltage External Trigger Voltage Alarm Interface Lock on, lock off and switch lock functions for alarm system or master control panel applications Over/Under Voltage Protection All receptacles turn off when power in exceeds 140V or drops below 100V. Receptacles turn back on when power returns to acceptable range External Control Connections Plug-in barrier strip terminal blocks Termination 9 foot cord with NEMA 5-15P plug EMI/RFI Filter 19dB@500kHz, 42dB@30MHz Safety Agency Approvals ETL Listed in US and Canada to UL Standard 60065 “Audio, Video & Similar Electronic Apparatus’ Surge Suppressor Maximum Surge Current 72,000A (exceeds UL1449-3 6000V, 3000A) Initial Clamping Voltage 205V, UL rating 330V Endurance IEEE C62.41-1991, B3 (C1), Pulses (lifetime): 1kv≥1,000,000; 3kv≥100,000; 6kv≥5000 Transient Noise Reduction 25dB@100kHz, 50dB@1MHz Response Time Less than 5 nanoseconds Protection Mode Line to neutral, zero ground leakage UL1449-2 Adjunct Results 1000 surges, 6000 volts, 3000A, C1 and B3 waveforms (IEEE C62.41), No failures Diagnostic LEDs Left (Green): On = Ground verified
Center (Green): On = Protection active
Right (Red): On = Protection reducedApplicable Standards IEEE standard 587-80 A & B, IEEE standard C62.41-1991, IEC 1000-4-5-1995 (IEC 801-5) Dimensions (H x W x D) 1.75" (44.5 mm) x 19" (483 mm) x 9" (228.6 mm) Weight 12 lbs (5.44 kg) - Documents
Documents
- Reviews
Write Your Own Review