- Description
Details
The SurgeX PF-420 Powerframe 420 Surge Eliminator and Power Conditioner provides guaranteed surge elimination and conditioning for audio, video, and mission critical equipment at the service panel. This unique solution is built with professional-grade NEMA magnetic shielding steel enclosures that meet code for use at the service entrance, sub-panels, and in-ceiling plenums.
They are engineered with Advanced Series Mode® surge elimination and power conditioning technologies to provide top-of-the-line protection. Superior to conventional MOV circuitry or MOV-hybrid designs, they completely eliminate surge energy up to 6,000 volts without producing harmful side effects such as ground contamination or common-mode disturbances. Completely non-sacrificial and never needing reset, they provide the most reliable protection available.The SurgeX branch circuit line also features both common mode and normal mode impedance tolerant EMI/RFI filtering, and SurgeX ICE (Inrush Current Elimination) for a complete power conditioning solution.
- Features
Features
- NEMA rated magnetic shielding steel enclosure
- Advanced Series Mode surge elimination
- Impedance Tolerant EMI/RFI filtering
- Over/Under voltage protection
- Inrush Current Elimination
- Self-circuit with visual indicator
- Specification
Load Rating 20 amps per circuit @ 120 volts(80 amps total) Power Requirement (no load) 15 watts per circuit Surge Let- Through Voltage(6000-volt surge) 0 volts UL 1449 Adjunct ClassificationTest Results 1000 surges, 6000 volts, 3000 amps, B3pulse; Measured suppressed voltage: 170volts; no failures Federal Guidelines Grade A, Class 1, Mode 1 (CID A-A-55818) EMI/RFI Filter, Normal Mode(50-ohm load) 40 dB @ 100 kHz; 50 dB @ 300 kHz;50 dB @ 3 MHz; 50 dB @ 30 MHz EMI/RFI Filter, Common Mode(50-ohm load) 18 dB @ 300 kHz; 30 dB @ 1 MHz;50 dB @ 5 MHz; 50 dB @ 20 MHz Maximum Applied Surge Voltage 6000 volts Maximum Applied Surge Current Unlimited, due to current limiting Maximum Applied Surge Energy Unlimited, due to current limiting Endurance(C62.41-1991 Category B3 pulses) 1 kV>500,000; 3 kV>10,000; 6 kV>1000 LED Output 12 volts DC, maximum 20 mA(resistor required) Temperature Range 5º to 35º C Humidity Range 5% to 95% R.H., non-condensing Agency Listings ETL and cETL (UL 1449, 2nd edition;CSA C22.2 No.8-M1986, R2000) Dimensions (H x W x D) 16.0" (406 mm) x 12.0" (305 mm) x 4.0" (102 mm) Weight 30 lbs (13.6 kg) - Reviews
Write Your Own Review