Stationary Racks

This welded assembly provides desk-top access to (19") control and monitor equipment.

The Atlas Sound 307-12 7RU wide opening wall cabinet is welded with center-section depths of 12" and 15", respectively. It includes three, 16-gauge CRS sections which include a 2" deep, solid-steel front door, a 12" or 15" deep center section with adjustable mounting rails, and a 4.5" deep rear door.

The AtlasIED WMA10-23 10G wall cabinet is 16-gauge, welded with 18" deep center-section and adjustable mounting rails, and a 4.5" deep rear section. Equipped with provisions for custom cabinet mounting, wire man­agement, equipment mounting, and structural support.

The Atlas Sound 912-18 12RU Stackable Utility Frame is uniquely engineered to provide assembled strength and shipping/storage economy. This low-cost, innovative unit features quick and simple assembly, and the versatility of the 912-18 allows the frames to be easily stacked.

The Atlas Sound 607-15 7RU stand alone basic wall cabinet is a surface mounting wall cabinet used for housing small electronic system installations including 19" wide amplifiers, tuners and associated communication controls for schools, churches, clubs and recreation facilities.

The Atlas Sound 410-15 10RU desktop cabinet rack is a welded rack that provides desk-top access to (19") control and monitor equipment. The 410-15 is 16-gauge CRS and includes one pair of mounting rails, tapped 10-32, hardware and wiring access below rear door or panel.

The Atlas Sound 121-18 21 RU floor rack is 22 5/16" wide, 18 1/2" deep, and contains 21RU vertical panel spaces. The 121-18 cabinet includes one pair of 11-gauge CRS fixed mounting rails.

The Atlas Sound AWR2W-HR 2RU Tilt Out Half Rack Wall Cabinet offers convenient access, lock-in security, and welded construction that can be surface or recessed mounted. It is designed to install within standard 16" stud wall construction, reducing installation time and the need to cut and repair dry wall.

The Atlas Sound AWR2W 2RU Tilt Out Wall Cabinet features convenient access and lock-in security for 19" equipment. This re-designed welded model can be surface or recessed mounted (trim ring included) and include a 3RU panel ­opening above the main bay for connector panels or power distribution.

The Atlas Sound AWR3W-HR 3RU Tilt Out Half Rack Wall Cabinet offers convenient access, lock-in security, and welded construction that can be surface or recessed mounted. The AWR3W-HR is designed to install within standard 16" stud wall construction, reducing installation time and the need to cut and repair dry wall.

The Atlas Sound AWR3W 3RU Tilt Out Wall Cabinet is a features convenient access and lock-in security for 19" equipment. This re-designed welded model can be surface or recessed mounted (trim ring included) and include a 3RU panel ­opening above the main bay for connector panels or power distribution.

The Atlas Sound 124-18 24 is a 24 RU floor rack. The cabinets are welded 16-gauge CRS and assembled for immediate use. Rear doors are hung with quick-release spring hinges which allow them to be rotated 180˚ for right- or left-hand opening.

The economical AtlasIED 221-18 cabinet is 22 5/16" wide, 18 1/2" deep, and contains 21RU vertical panel spaces. The 221-18 cabinet includes one pair of 11-gauge CRS adjustable mounting rails.

The Atlas Sound 310-12 10RU wide opening wall cabinet is welded with center-section depths of 12". It includes three, 16-gauge CRS sections which include a 2" deep, solid-steel front door, a 12" deep center section with adjustable mounting rails, and a 4.5" deep rear door.

The Atlas Sound 310-15 10RU wide opening wall cabinet is welded with center-section depths of 15”. It includes three, 16-gauge CRS sections which include a 2” deep, solid-steel front door, a 15” deep center section with adjustable mounting rails, and a 4 1⁄2” deep rear door.

The Atlas Sound 312-12 12RU wide opening wall cabinet is welded with center-section depths of 12". It includes three, 16-gauge CRS sections which include a 2" deep, solid-steel front door, a 12" deep center section with adjustable mounting rails, and a 4.5" deep rear door.

The Atlas Sound 312-15 12RU wide opening wall cabinet is welded with center-section depths of 15". It includes three, 16-gauge CRS sections which include a 2" deep, solid-steel front door, a 15" deep center section with adjustable mounting rails, and a 4.5" deep rear door.

The Atlas Sound 135-18 35RU Floor Rack offers installer-friendly advantages, including an expanded 6RU opening in the cabinet top and bottom which can be left open for wire access and/or ventilation, or closed using a standard vent or solid panels. Rear doors (included with all models) are hung with quick-release spring hinges which allow them to be rotated 180° for right or left-hand opening.

The Atlas Sound 316-12 16RU wide opening wall cabinet is welded with center-section depths of 12". It includes three, 16-gauge CRS sections which include a 2" deep, solid-steel front door, a 12" deep center section with adjustable mounting rails, and a 4 1⁄2" deep rear door.

The economical Atlas Sound 40-18 40RU floor rack cabinet is 22 5/16" wide, 18 1/2" deep, and contains 40RU vertical panel spaces. The cabinet includes one pair of 11-gauge CRS fixed mounting rails. It is constructed of 16-gauge CRS and includes base, top panel, side panels, mounting rails, a removable rear door with cylinder lock and flush door pull handle.

The Atlas Sound 144-18 44RU Floor Rack is 18 1/2" deep, 22 5/16"" wide, 40RU high. The cabinet is welded 16-gauge CRS and assembled for immediate use. Rear doors are hung with quick-release spring hinges which allow them to be rotated 180˚ for right- or left-hand opening. Rear door includes flush door handle and cylinder lock. See chart on back for appropriate Optional front door model numbers. If front door is ordered, it will be keyed differently than the rear door for security.

The Atlas Sound 244-18 44RU Welded Rack is 18.5" deep and contains 44RU vertical panel spaces. The 244-18 cabinet includes one pair of 11 ga. CRS adjustable mounting rails. It is constructed of 16 ga. CRS and include base, top panel, side panels, mounting rails, and a removable rear door with cylinder lock and flush door pull handle.

For basic ganging rack requirements, Atlas offers the 544-25 44RU Floor Rack. The 544-25 is 22 5/16" wide, 25 1/2" deep, and has 44 vertical panel spaces. The 500 Series Cabinets are welded 16-gauge CRS and assembled for immediate use. Rear doors are hung with quick-release spring hinges.