The LER-3527 enclosed or stand-alone floor rack offers solid structural support for electronics. Includes rear door. Front door is optional (order separately).

The EIA/TIA/RoHS compliant, stand-alone LER-3527 floor rack is 67.375" H x 27" D x 23.06" W with panel space of 35 rack units. The load capacity is 3150 lbs.This rack includes a recessed rear door with vents and key lock, welded side panels with vents, top with 7U opening and combination knockouts, open base with grounding stud, one pair adjustable front mounting rails with printed RU increments, combination knockouts above and below rear door, and provisions to mount an optional surface-mount front door or rear rails (ordered separately). Manufactured in the U.S.A. with certified U.S. steel and has a black wrinkle powder epoxy finish, UL Listed to UL2416.

• Frame: Fully welded 16-ga. steel with 14-ga. base, reinforced at load-bearing junctions for strength equivalent to 11-ga. steel. Overall height is 67.375" (35U useable) Overall depth is 27" (24.34" useable)
• Front: Open front with beveled corners and vents above and below main opening. Clearance from rails to outside frame (flush) is 1.75." A surface-mount front door is available as an option
• Rear: Includes recessed rear door with vents and key lock. Door can be omitted by ordering Model No. LER-3527-LRD. Combination knockout panels above and below rear door include .5" for wireless antennas, .75-.5" and 1.5-1" for conduit. A blank project panel is located below rear door
• Top: Features 7U opening with riveted rails, taped 10-32, which can be closed with 2 black steel panels included as shipping stiffeners. Optional 19" accessories can also be mounted here. The top also features a 6"D rear plane with 3 combination knockouts for conduit (2-1"), 2 for conduit (1.5- 1") plus room to use a Greenlee style punch for 4" conduit. Four .5" knockouts for BNC style wireless antennas
• Open Base: 14-ga. steel frame with full size opening facilitates floor entry of cables. The base has provisions to readily accept mounting an optional mobile or stationary platform base or leg levelers (pg. 3), as well as anchor bolts (not included). Includes grounding stud in one corner
• Welded Side Panels: Vents at top and bottom are designed to accept optional fan kits
• Adjustable Rails: Includes 1 pr. front mounting rails tapped 10-32 with printed rack unit increments for quick set-up. Rails are fully adjustable and can be set anywhere along side rail supports. Rear rails are optional
• Cable Management: Combination knockouts above and below rear door
• Thermal Management: Vents in top, sides, and rear door are made to accept optional fan kits
• Load Capacity: 3150 lbs
• Compliance: EIA/TIA/RoHS compliant, UL2416 Listed
• Finish: Black wrinkle powder epoxy
• Hardware PilotPoint™ screws with captive washers

Spec Sheet