- Description
Details
Radial Catapult TX4M 4-Channel Cat 5 Audio Snake with 4 XLR INs and 4 XLR MIC OUTs
The Catapult TX4M is a four-channel snake that is designed to route four channels of mic-level signal across long distances using shielded Cat5/Cat6 cable, doing so with little to no signal degradation. As such, it’s useful in live-sound reinforcement applications, as it allows live sound stage techs to use relatively affordable cable to secure quality audio connections around large stages and venues. It’s also suitable for system contractors who can now utilize pre-wired networks to move audio throughout disparate rooms.
The Catapult TX4M gives you four XLR input jacks, as well as four XLR transformer-balanced through-outputs optimized for mic-level signal. You can run phantom power over the snake as long as you use a shielded Cat5 cable. You’ll also note the two RJ45-type etherCON connections. One is an output, for use with the RX4M on the receiving end. The other is a throughput, and can be implemented in routing signal to additional Catapults. In total, you'll have the ability to split and route mic-level signal to three different locations.
A ground-lift switch helps eliminate any noise issues on the Cat5 or Cat6 line, while a steel handle provides easy transport, and four bumpers protect the Ethernet jacks and ground-lift switch from wear and tear.
- Features
Features
- Glass-filled, nylon XLR connectors
- Nickel-silver contacts
- 4 x XLR through-outputs with mic-level transformer isolation for additional routing
- 1 x Ethernet through-output for feeding additional Catapult models
- A protective steel handle facilitates convenient transportation
- Durable powder coat
- Ground lift for the Cat5/Cat6 cable’s ground path to mitigate ground-loop noise
- 4 x bumpers used to protect Ethernet connectors and ground-lift switch from damage
- Double-sided, military-spec grade circuit board for durability, full ground plane, and a marked reduction in radio-frequency interference
- Radial push switches with a durable metal outer casing, rated at over 20,000 cycles
- Specification
Audio Circuit Type Passive mic splitter, transformer based Frequency Response 7Hz ~ 20kHz Total Harmonic Distortion 0.001% Dynamic Range 140dB Gain 0dB/-0.8dB Maximum Input +35dBu Minimum Load Impedance 100 ohms Intermodulation Distortion 0.003% Common Mode Rejection >113dB Chassis Size 2" (50.8 mm) x 4.13" (104.9 mm) x 8.13" (206.5 mm) Weight 2.6 lbs (1.18 kg) - Documents
Documents
- Reviews
Write Your Own Review