Skip to main content

AKG PCC160 Phase Coherent Cardioid Boundary Microphone

Part #:
3332H00010
Model #:
PCC160
Availability: Usually arrives in 5-9 business days. Please be aware that global supply shortages outside our control may interfere with our normal delivery times and product availability. For more information, email sales@proacoustics.com or call us at 888-256-4112.
Certified Audio
Expertise
FREE Custom
System Design
Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

Get a Quote, Price or Support Fast!

We want to make contacting us as fast and as easy as possible. Please reach out if you have any questions or concerns about our products, system design, technical support, or orders.
Phone Monday - Friday
8:00 AM - 5:00 PM
1-888-256-4112
Email Contact us by email or
our simple form.
SEND EMAIL

The AKG PCC160 is a surface-mounted half-supercardioid microphone intended for professional applications on stage floors, lecterns, conference tables and news desks wherever improved gain-before-feedback and articulation are important.

Description

Similar to the Pressure Zone Microphone (PZM), the PCC is designed to be used on a relatively large boundary surface. Unlike the PZM, the Phase Coherent Cardioid uses a subminiature supercardioid mic capsule. Its directional polar pattern improves gain-before-feedback, reduces unwanted room noise and rejects sounds from the rear. Surface-mounting creates a "half-supercardioid" polar pattern and increases directivity 3 dB.

Since the microphone capsule is placed on a boundary, direct and reflected sounds arrive at the diaphragm in-phase. This coherent addition of direct and reflected waves increases sensitivity 6 dB and prevents phase cancellations. The mic capsule is small enough to ensure phase coherency up to the highest frequencies in the audible spectrum, resulting in a wide, smooth frequency response free of phase interference. Clarity and reach are also enhanced.

Self-contained electronics eliminate the need for an in-line preamp box. The PCC160 can be phantom powered directly from the console or other remote power source providing 12 to 48 volts. If battery power is required, a battery supply unit can be inserted anywhere in the mic line right up to the console or mixer. A “bass tilt” switch allows the user to tailor the low-end response for particular applications.

The PCC160W is finished in off-white to blend with church altars and other  surroundings where lighter color is appropriate.

The heavy-gauge, all steel body protects the unit from accidental abuse. Permanent mounting is enabled by screw holes in the base. Engineering attention-to-detail has assured years of troublefree use from this reliable microphone.

Features

  • Miniature-sized PCC condenser microphone with supercardioid pickup and 15-ft output cable with XLR-type output
  • Industry-standard stage fl oor microphone
  • Phase Coherent Cardioid design prevents coloration from surface sound reflections
  • High output overrides mixer input noise
  • Half-supercardioid polar pattern rejects the pit orchestra and offers high gain-before feedback
  • Very rugged
  • Low profile

Specifications

Type Phase Coherent Cardioid
Element Electret condenser
Frequency response (typical) 50 Hz to 18,000 Hz at 30 degrees incidence to surface
Polar pattern Half-supercardioid (supercardioid in the hemisphere above the primary boundary)
Impedance 150 ohms nominal (85 ohms actual), balanced. (Recommended load impedance 1000 ohms or greater)
Open-circuit sensitivity 22mV/Pa (–33 dB re 1 V/Pa)
Power sensitivity –31 dB re 1 milliwatt/Pa/–123dBm EIA
Equivalent noise level (self noise) 22 dB typicaL (0dB = .0002 dyne/cm2), A-weighted
S/N ratio 72 dB at 94 dB SPL
Maximum SPL for 3% THD 120 dB SPL
Polarity Positive pressure on the diaphragm produces positive voltage on pin 2 w/ pin 3 of output connector
Cable 15-foot, black, two-conductor shielded cable with Switchcraft TA3F connector and A3M connector
Operating voltage Standard phantom power: 12 to 48 volts DC positive on pins 2 and 3 with respect to pin 1
Safe Operating Temperature –10° to +50° C or +14° to +122° F
Current drain 4 mA nominal
Materials All steel body construction
Optional accessories Crown PH-1A phantom power supply (one channel, battery or AC-adapter powered)
Finish Black
Dimensions (H x W x D) 0.79" (20 mm) x 3.15" (80 mm) x 6.69" (170 mm)
Net weight 0.71 lbs (326 g)
My Cart