The STS DAM+ is a heavy duty table stand with extremely good shock absorbing properties. It provides a 4-pin connector compatible with all DAM+ Series goosenecks as well as with the gooseneck microphones of the CS3 discussion system. The STS DAM+ features an extremely rugged switch which can be programmed for the following functions: push to talk, push to mute, push on/off, low cut on/off. The status of the microphone is displayed by an LED square.
| Frequency Range | 60 to 22,000 Hz |
|---|---|
| Max. SPL | 136 dB (for 1% THD) |
| Equivalent Noise Level | |
| Signal/Noise Ratio (A-Weighted) | >64 dB |
| Impedance | |
| Recommended Load Impedance | >=2,000 ohms |
| Supply Voltage | 9 to 52 V phantom power to IEC 61938 (DPA adapter integrated) |
| Powering | |
| Connector | 3-pin Male XLR and DMA+ 4 Pin |
| Finish | Matte Black |
| Dimensions (H x W x D) | 1.57" (40 mm) x 3.54" (90 mm) x 5.31" (135 mm) |
| Box Dimensions (H x W x D) | 4.33" (110 mm) x 1.96" (50 mm) x 3.93" (100 mm) |
| Net Weight | 1.98 lbs (0.900 kg) |
| Gross Weight | 2.09 lbs (0.950 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
