- Description
Details
ART TubeOpto 8 8-Channel Tube Microphone Preamplifier / Optical Interface
The ART TubeOpto 8™ is the ideal Eight Channel input / output expander for any ADAT lightpipe equipped audio interface, direct-to-disc recorder or DAW. Eight high-quality second-generation discrete Class-A vacuum tube microphone preamps are packaged in a single rack space unit with eight channel 24-bit digital I/O.
Every input on the TubeOpto8 offers full control of the signal path with pad, phase and low-frequency roll-off switches. Input gain and variable output level control of each channel allows up to 70dB of clean gain with incredible sonic transparency or for the tube stage to be dialed in for warming effects and soft clipping. Each channel has wide range LED meters monitor the preamp output levels while clip indicators monitor mic-preamp peak levels. ADAT lightpipe I/O handles eight channels of 24-bit audio input and output at either 44.1 or 48 kHz sample rates. Wordclock in and thru-puts allow multiple Tubeopto8’s to be synced in complex system configurations.
- Features
Features
- Eight fully featured Class-A tube mic preamps
- Input gain and output level controls on every channel
- Two additional front mounted high impedance instrument line inputs
- Eight channels of ADAT lightpipe digital 24 bit audio I/O at 44.1 or 48khz
- Input pad, phase flip and low-frequency roll-off switches on every channel
- Eight 1/4-inch TRS balanced outputs
- Specification
Input Impedance Mic: 6.4K Ohm
Line: 20K Ohm
Instrument: 2.5M OhmOutput Impedance Balanced outputs: 200 Ohm balanced Frequency Response Analog in to Digital out: 12Hz - 20KHz +0, -1dB @ 44.1 KHz sample rate THD 1KHz: < .015% @ -30dB ref clipping
20-20KHz: < .033%HPF 80Hz, 1-pole Equivalent Input Noise Mic/Line: -130dBu, input shorted, max gain, “A” wtd.
Instrument: -105dBu, input shorted, max gain, “A” wtd.Maximum Input Level Mic/Line: +18dBu balanced w/pad
Instrument: +15dBu
Meter clip light: -2dB ref. A/D clip (0dB FS)Maximum Gain Mic: 64dB
Instrument: 36dBMaximum Output Level Balanced: +20dBu (+4dBu setting)
Unbalanced: +14dBu (+4dBu setting)
Output level switch: Lowers output by 10dB @ -10dBV settingWordclock Range 40KHz - 52KHz Sample Rate Settings 44.1KHz, 48KHz, ADAT, Wordclock A/D Dynamic Range 105dB ("A" wtd.) D/A Dynamic Range 105dB ("A" wtd.) A/D Latency 0.667ms(48KHz), 0.725ms(44.1KHz), 32 samples D/A Latency 0.458ms(48KHz), 0.500ms(44.1KHz), 22 samples Power Requirements USA – 105-125VAC, AC 60Hz, 29Watts typical, Export units configured for country of destination Minimum System Requirements ADAT interface port Dimensions 1.75" (44.5 mm) x 19" (482.6 mm) x 14.4" (365.8 mm) Weight 13.2 lbs (6 kg) - Documents
Documents
- Reviews
Write Your Own Review
