- Description
Details
When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The Ashly ne24.24M 4x8 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output 4 channels of DSP processing at a time. These cards are easily installed in the field without the need to reprogram the device.
Matrixing allows you to route any input to any output and control individual levels once they have been assigned. Fixed path architecture and extensive processing power per channel will reduce the amount of time it takes to set up
your system.
An optional GPO Logic Card allows the ne24.24M to trigger projection screens, curtains or lights. The logic card is installed in place of a 4-input or 4-output card and occupies one of the four expansion slots.- Features
Features
- 10/100 Ethernet and RS-232 computer interface Is standard
- Extensive DSP Available
- Easy and intuitive user interface
- Mic/Line inputs
- 24-bit A/D-D/A audio resolution
- 24-bit/150 MHz DSPs
- Up to 24 channels of audio processing
- 4x4 base unit configuration
- Expand inputs or outputs 4 channels per module
- Modules easily field installable
- Euroblock connectors for audio, preset recall, DC remote level and data
- 31 preset locations
- Four dedicated remote controls for Level, Preset Recall and Programmable Functions
- Third Party Control Friendly
- Input and output metering viewable in dBu
- Multi-level Security
- Safety/Compliance: FCC, CE, RoHS
- Specification
Connections Euroblock Input Active Balanced, 18 kohms Max Input Level +20dBu Input Gain Range -50dB to +12dB, selectable polarity Output Active Servo Balanced, 112 ohms Max Output Level +20dBu Output Gain Range -50dB to +12dB, selectable polarity Frequency Response 20 Hz-20kHz, ±0.25 dB THD <0.01% @1 kHz, +20 dBu Dynamic Range >110 dB (20 Hz-20 kHz) unweighted Output Noise <-90 dBu unweighted Power Requirements 90 - 240VAC, 40W Dimensions (H x W x D) 3.5" (89 mm) x 19" (483 mm) x 8.5" (216 mm) Unit Weight 8.9 lbs (4.04 kg) Shipping Weight 12 lbs (6 kg) - Reviews
Write Your Own Review