Ashly Audio nXe1.54 4-Channel Network Power Amplifier 4 x 1500W @ 2 Ohms
Usually arrives in 5-9 business days.
The Ashly nX1.54 Power Amplifier designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
The nX1.54 Power Amplifier designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
Sound systems in large architectural spaces require flexibility and big power whether it’s for line arrays, distributed sound systems, Left/Center/Right 3 and 4-way speaker systems, our new nX Series delivers up to 12,000W of clean power in a convenient 2U package. What’s more impressive is the nX Energy Management System with defeatable <1W sleep-mode (<1W energy consumption beats the most aggressive Energy Star benchmark†). nX Amplifiers have multiple independent power supplies that provide increased performance and reliability.
nX Series is the base level amplifier, available in either 2 or 4-channel models. Use rear panel DIP switches to program each channel output for either High-Z (70V or 100V Constant Voltage) or Low-Z (stable down to 2 Ohms) operation. When in Sleep Mode, the nX amplifiers draw less than 1 Watt.
| 2 Ohms | 1,500W |
|---|---|
| 4 Ohms | 1,500W |
| 8 Ohms | 1,250W |
| 4 Ohms | 3,000W |
| 70V (per channel) | 1,500W |
| 100V (per channel) | 1,250W |
| Sleep Mode | < 1W |
| Standby Mode | 70W |
| Idle (no signal) | 100W |
| Sleep Mode | 0.1A |
| Standby Mode | 1.30A |
| Idle (no signal) | 1.85A |
| Typical | 16.0A |
| Sleep mode | < 3.4 |
| Standby mode | 238 |
| Idle (no signal) | 340 |
| Typical (1/8 max pwr) | 1,700 |
| Voltage Gain | Selectable at 26dB, 32dB, 38dB, or 1.4V |
| Damping Factor | >250 (8 Ohms load |
| Input High Pass Filter | 80Hz 2nd order |
| Distortion (SMPTE, typical) | |
| Distortion (THD-N, typical) | |
| Channel Separation | -75dB (dB from full output, 1kHz) |
| Signal to Noise (20Hz-20KHz, unweighted) | >111dB |
| Frequency Response | 20Hz-20kHz, +/-0.05dB |
| Balanced Input Connector | Euroblock 3.5mm, 1/4” TRS and XLR Combo jack |
| Input Impedance | 10K Ohms |
| Maximum Input Level | +21dBu |
| Speaker Output Connector | Neutrik® speakON |
| † Control Network | Compatible w/ standard 100MB Ethernet |
| † AUX Output Connector | Balanced Euroblock 3.5mm |
| † AUX Output Maximum Level | +21dBu |
| † Remote Standby Contact Closure | Euroblock 3.5mm, close contact to GND for standby mode |
| † Preset Recall Contact Closure | Euroblock 3.5mm, close contact to GND for preset 1-4 recall |
| Data Connection | Euroblock 3.5mm - Gnd, +18V, In, Out |
| Remote DC Level Control | Euroblock 3.5mm - Gnd, CV, V+ per input |
| Attenuators (per channel) | Front panel, software, offset link group, and remote. Fully off = Mute |
| Amplifier Protection | Inrush current limitation, temperature monitoring, output over-power protection, mains fuses |
| Cooling | Continuously variable temperature controlled axial fan(s) |
| Environmental (noncondensing) | 32-113 deg. F, (0-45 deg, C) |
| Nominal (Automatic Sensing SMPS | 120VAC; 240VAC |
| Operating Range | 70-135VAC; 140-270VAC |
| Minimum power-up | 85VAC; 170VAC |
| Dimensions (H x W x D) | 3.5" (89 mm) x 19" (483 mm) x 16.84" (428mm) |
| Weight | 28 lbs (12.7 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.