The nXp 752 allows for each speaker output to be configured for low impedance (2, 4, or 8 Ohm), or 25V, 70V, or 100V constant voltage output. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing. NX amplifiers are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
The NXP features Class-D Switching Amplifier Technology with universal switch-mode power supply and Power Factor Correction (PFC) that operates from 70VAC to 270VAC.
Multi-Mode Operation offers selectable outputs allowing you to choose the desired output mode on each channel. Set the DIP-switch configuration for Low Impedance (2, 4, and 8 Ohm), or 25V, 70V, or 100V Constant Voltage and you’re set to go.
For greater Energy Efficiency, the NXP has power-saving Ashly EMS™ (Energy Management System) which provides an automatic sleep-mode drawing less than 1 Watt (defeatable).
Ethernet Control using Protea™ NE software allows serial data control by Ashly programmable remotes or third party controllers, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, optional Dante™, CobraNet™, or AES3 digital audio capability (factory-installed).
Real-Time Clock with Event Scheduler offers automatic assigned execution for selected functions and tasks. The event scheduler is programmed from software and stored in the amplifier.
Use Ashly's free Remote Control app for custom design of secure wireless control over network via an iPad®.
32-bit SHARC DSP Processing at 48kHz or 96kHz Sample Rates. Comprehensive software control of digital signal processing, matrix and auto-mixing, built-in signal generator for test tone and noise-masking, swept output load impedance monitoring. Use Ashly Remote iPad control to select DSP functions including gain, mute, matrix, A/B source select, PEQ filter level, and meters.
Utilizing the FIR Filter-Ready PneS software allows you to load a speaker manufacturer's .fir or .csv file to achieve precision tuning.
