| 2 Ohms |
1500W |
| 4 Ohms |
1500W |
| 8 Ohms |
1250W |
| 4 Ohms |
3000W |
| 70V (per channel) |
1500W |
| 100V (per channel) |
1250W |
| Sleep Mode |
< 1W |
| Standby Mode |
70W |
| Idle (no signal) |
100W |
| Sleep Mode |
0.1A |
| Standby Mode |
1.30A |
| Idle (no signal) |
1.85A |
| Typical |
16.0A |
| Sleep Mode |
< 3.4 |
| Standby Mode |
238 |
| Idle (no signal) |
340 |
| Typical (1/8 max pwr) |
1,700 |
| Voltage Gain |
Selectable at 26dB, 32dB, 38dB, or 1.4V |
| Damping Factor |
>250 (8 Ohms load |
| Input High Pass Filter |
80Hz 2nd order |
| Distortion (SMPTE, typical) |
|
| Distortion (THD-N, typical) |
|
| Channel Separation |
-75dB (dB from full output, 1kHz) |
| Signal to Noise (20Hz-20KHz, unweighted) |
>111dB |
| Frequency Response |
20Hz-20kHz, +/-0.05dB |
| Balanced Input Connector |
Euroblock 3.5mm, 1/4” TRS and XLR Combo jack |
| Input Impedance |
10K Ohms |
| Maximum Input Level |
+21dBu |
| Speaker Output Connector |
Neutrik® speakON |
| Control Network |
Compatible w/ standard 100MB Ethernet |
| AUX Output Connector |
Balanced Euroblock 3.5mm |
| AUX Output Maximum Level |
+21dBu |
| Remote Standby Contact Closure |
Euroblock 3.5mm, close contact to GND for standby mode |
| Preset Recall Contact Closure |
Euroblock 3.5mm, close contact to GND for preset 1-4 recall |
| Data Connection |
Euroblock 3.5mm - Gnd, +18V, In, Out |
| Remote DC Level Control |
Euroblock 3.5mm - Gnd, CV, V+ per input |
| Attenuators (per channel) |
Front panel, software, offset link group, and remote. Fully off = Mute |
| Amplifier Protection |
Inrush current limitation, temperature monitoring, output over-power protection, mains fuses |
| Cooling |
Continuously variable temperature controlled axial fan(s) |
| Environmental (noncondensing) |
32-113 deg. F, (0-45 deg, C) |
| Nominal (Automatic Sensing SMPS) |
120VAC; 240VAC |
| Operating Range |
70-135VAC; 140-270VAC |
| Minimum Power-Up |
85VAC; 170VAC |
| Input Source Select Options |
Analog, Auto (Net, AES3, Analog) |
| Threshold |
-20dBu to +20dBu |
| Ratio |
Infinite |
| Attack |
0.2ms/dB to 50 ms/dB |
| Release |
5ms/dB to 1000ms/dB |
| Threshold |
-20dBu to +20dBu |
| Ratio |
1.2:1 to infinite |
| Attack |
0.2 to 50ms |
| Release |
5ms/dB to 1000ms/dB |
| Detector |
Peak/Average |
| Attenuation Bus |
2 available |
| Metering |
In, Out, Attenuation, Graphical |
| Target Level |
-40dBu to +20dBu |
| Action |
Gentle, normal, aggressive, user defined |
| Maximum Gain |
0dB to +22dB |
| Metering |
Input, Gain, Attenuation |
| Ratio |
1.2:1 to 10:1 |
| Threshold Below Target |
-30dB to 0dB |
| Gain Increase/Decrease Rate |
5ms/dB to 1000ms/dB |
| Hold Time |
0-6 sec |
| Max Gain |
-20dB to +20dB |
| Min/Base Gain |
-40dB to +20dB |
| Gain Change Rate |
0.2s/dB to 20s/dB |
| Link Group |
16 available |
| ANC Input Channel |
1-2 or 1-4 |
| Noise Threshold |
-40dBu to +20dBu |
| Program/Ambient Gain Ratio |
0.3:1 to 3:1 |
| Metering |
Input level, Attenuation, Average noise |
| Ducking |
High/Low Priority, Trigger, Filibuster, Ducked Program |
| Trigger Threshold |
-80dBu to +20 dBu |
| Ducking Release |
5ms/dB to 1000ms/dB |
| Ducking Depth |
0dB to -30dB, -∞ |
| Enable Ducking at Matrix Mixer |
Yes |
| Metering |
Input |
| Threshold |
-80dBu to +20dBu |
| Range |
off, 100dB to 0dB |
| Attack |
0.2ms/dB to 50 ms/dB |
| Release |
5ms/dB to 1000ms/dB |
| Metering |
Key Signal, Gate LED, Graphical |
| Key Engage Enable |
Yes |
| Key Frequency |
20Hz to 20kHz |
| Key Bandwidth |
0.016 to 3.995 Octave |
| Gain (with/without VCA) |
-50dB to +12dB, off, polarity invert |
| Digital VCA Groups |
4 available |
| Remote RD8C Gain |
Enable per channel, 0dB to -∞ |
| WR-5 (neWR-5) Remote Gain |
0 to -50dB, Mute |
| Filter Type |
Constant Q or proportional |
| Bandwidth |
0.499oct to 0.25oct |
| Frequency |
20-20kHz |
| Level |
-30dB to +15dB |
| Q Value |
0.016 to 3.995 Octave |
| Frequency |
20Hz-20kHz |
| Level |
-15dB to +15dB |
| Frequency |
20Hz-20kHz |
| Frequency |
20Hz-20kHz |
| Q Value |
3.047 to 0.267 |
| Frequency |
20Hz-20kHz |
| Q Value |
92.436 to 0.267 |
| Feedback Suppressor |
Only available with 48kHz sampling rate |
| Filters |
12 |
| In/Out per Filter |
Yes |
| Lock per Filter and Global Lock |
Yes |
| Filter Modes |
Float, Restricted, Manual |
| Filter Type |
Notch, Parametric |
| Filter Frequency Range |
20Hz to 20kHz |
| Parametric Filter |
+15dB to -30dB |
| Filter Bandwidth |
0.016 to 3.995 Octave |
| Detector Sensitivity |
5 levels |
| Float Time |
5 minutes to 24 hours |
| Crossover |
2 Way, 3 Way, 4 Way Crossover & High Pass/Low Pass Filters |
| Bessel & Butterworth Filters |
12/18/24/48 dB/oct |
| Linkwitz-Riley Filter |
12/24/48 dB/oct |
| Frequency |
Off, 20Hz-20KHz |
| Speaker Delay |
0-21ms |
| Delay |
0-682ms |
| Speaker Delay |
0-10.6ms |
| Delay |
0-341ms |
| Range |
-60dBu to +20dBu |
| Increments |
1dB |
| Peak Hold Indicator |
Yes |
| Signal Generator Tool |
Pink noise, White noise, Sine wave |
| Signal Level |
Off, -50dBu to +20dBu |
| Sine Wave Frequency |
20Hz-12kHz |
| Gain (0.5dB increments) |
Off., -50 to +12dB |
| Mute |
Per channel |
| Auto-mixer Enabled |
Per channel |
| Global Auto-mixer Response |
0.01sec to 2sec |
| Enable Ducking at Mixer |
Yes |
| Ducking LED |
Per channel if enabled |
| Metering |
Level, auto-mixer level |
| Input A/D, Output D/A |
24 bit |
| DSP Processors |
32-bit floating point |
| Sample Rates |
48kHz, 96kHz |
| Propagation Delay @ 48kHz |
1.42ms |
| Propagation Delay @ 96kHz |
0.71ms |
| Dimensions (H x W x D) |
3.5" (89 mm) x 19" (483 mm) x 16.84" (428 mm) |
| Shipping Weight |
28 lbs (12.7 kg) |
