Ashly Audio SRA-2075 1U Power Amplifier
Usually arrives in 5-9 business days.
The Ashly Audio SRA-2150 1U power amplifier is an advanced, efficient amplifier that is perfect for installations with modest power requirements. Housed in a compact single rack space chassis and weighing only 10 lbs, and designed to drive 4 or 8 ohm loads. With remote power turn-on/off and adjustable turn-on delay up to eight seconds.
The SRA-2150 1U power amplifier is an advanced, efficient amplifier that is perfect for installations with modest power requirements. Housed in a compact single rack space chassis and weighing only 10 lbs, and designed to drive 4 or 8 ohm loads. Switch mode power supplies and Class-D amplifier circuitry provide an extremely power efficient solution. It is convection cooled, so little maintenance is needed after the installation, and no annoying fan noise. Of course you get the reliability, superior sonic quality and rugged construction you've come to expect from Ashly.
| Rated Power 8 Ohms (Stereo) | 2 x 80W |
|---|---|
| Rated Power 4 Ohms (Stereo) | 2 x 150W |
| Rated Power 8 Ohms (Bridged Mono) | 1 x 300W |
| Rated Power 25V (Stereo) | 2 x 150W |
| S/N (20 Hz-20 kHz, Unweighted) | >105dB |
| 1/8th Output (Pink Noise @ 4 Ohm) | 37.5W |
| 1/8th Draw (Pink Noise @ 4 Ohm) | 64.0W |
| 1/8th Current (Pink Noise @ 4 Ohm) | 1.10A |
| Idle Power (Pink Noise @ 4 Ohm) | 20.0W |
| Idle Current (Pink Noise @ 4 Ohm) | 0.35A |
| Frequency Response (8 Ohms) | 20 Hz - 20k Hz, ± 1.0 dB |
| Input Impedance | 20 k ohms, balanced |
| Input Sensitivity | 1dBu (75W), 4dBu (150W) |
| Gain | 26dBu, 36dBu |
| Maximum Input Level | +21dBu |
| Damping Factor (8 Ohms) | > 200 |
| Cooling | Convection |
| Output Circuitry | Class D |
| Connectors (each channel) | Input - each channel 3- Pin Euroblock Output - each channel Screw terminals |
| Front Controls | AC Power Switch Input Attenuators |
| Front Indicators (LED Color) | Power (Blue), Standby (Yellow), Protect (Red), Clip (Red) Signal Present (Green) |
| Rear Controls | (4) Delay DIP Switches (2) 80Hz HPF On/Off Button (2) Gain Sensitivity Button (2) Bridge/Stereo Mode Switch |
| Amplifier and Load Protection | Output Overcurent, DC Output, Supply Overvoltage, Chassis Temperature Inrush Limiting Mains Fuse |
| Cordset | 3-Prong IEC |
| Dimensions (H x W x D) | 1.75" (44.5 mm) x 19" (483 mm) x 11.0" (279.4 mm) |
| Net Weight | 8.83 lbs (4 kg) |
| Shipping Weight | 15 lbs (7 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.