Astatic 40-119 Shock Mount Base with 5-Pin XLR-M Output (Discontinued)

The 40-119 utility microphone base is designed to accept the popular 800 or 900 series ASTATIC mini-gooseneck microphones as well as any other miniature gooseneck microphone with a three pin professional audio connector.

The 40-119 features a specially compounded energy absorbing "shock mount" pad to decouple the base from sources of unwanted mechanical resonance, i.e. podiums, lecterns, tables, etc. This unit features a dependable momentary push switch that provides a dry contact between pins 4 and 5 of the cable terminating XLR connector. The switch can be configured for either "push-to-open" or "push-to-close" using the slide switch located on the underside of the base. The 40-119 base is used to control an independent device while audio signal from the mic is always on.

The 40-119 is supplied with a rugged four conductor, two shielded twenty foot cable terminated with a professional five pin male XLR type connector for balanced audio. The base is constructed of die cast zinc with a steel base plate.

• Large tactile push switch.
• Selectable Push-To-Talk or Push-To-Mute (-55dB).
• Direct input connection via top panel-mount 3-pin female XLR type connecter.
• Special energy absorbing shock mount compounded on bottom.
• Includes 7’ Four conductor, two shielded cable terminating in 3-pin male XLR type connecter.
• Fits any mini condenser gooseneck mic or other similar mics and attachments with XLR type connecter.

Spec Sheet