AtlasIED FA136T47 6" Coaxial In-Ceiling Loudspeaker Driver
Usually arrives in 5-9 business days.
The Atlas Sound FA136 6 inch Coaxial In-Ceiling Loudspeaker Driver is a high-fidelity loudspeaker that delivers 50-watts with full frequency response and wide dispersion. UL listed assemblies are manufactured with highquality materials including a Kevlar, fiber-reinforced, polypropylene woofer.
The FA136 is a high-fidelity, coaxial, 6" loudspeaker that delivers 50-watts with full frequency response and wide dispersion. UL listed assemblies are manufactured with highquality materials including a Kevlar, fiber-reinforced, polypropylene woofer and a Norsorex synthetic rubber surround for high-definition bass, structural integrity, effective damping and weather-resistance. Each unit includes a post-mounted dome tweeter with a mylar diaphragm and ferrofluid-cooled voice coil for smooth response and excellent power handling capability.
This speaker driver has been engineered as a system with a high performance matched enclosure, choice of transformers and attractive grilles. The Strategy Series high performance enclosure Model FA97-6 is a deep backbox with a volume of (.17 ft3) complete with acoustic batting. The enclosure front-loads the loudspeaker, is offered with and without knockouts (NK) and installs quickly and easily into the ceiling using only a screwdriver to adjust the rotating clamps, or to tighten conventional screws. For limited depth installations, mounting ring Model FAPR-6 and low profile enclosure model FA95-6 are offered. Grilles are equipped with three serrated studs for hardware-free, push-on installation.
| Size | 4 Inch |
|---|---|
| Power Handling | 25 Watts Peak, 15 Watts RMS |
| Sensitivity (1W/1M) | 92dB Peak, 88dB Average |
| Impedance | 8 Ohms Nominal, 6 Ohms Minimum |
| Frequency Response | 110 Hz- 20 kHz +5dB |
| Dispersion | 130° (2 kHz Octave Band, -6dB Points) |
| Cone Material | Treated Paper |
| Surround Material & Damping | Half Roll Foam |
| Flux Density | 11,300 Gauss, 1.13 Tesla |
| Crossover | 8000 Hz |
| Magnet Weight | Nominal, 10 oz. (260gm) |
| Basket Material | Painted Stamped 20 ga. CRS |
| VC Diameter | 1" (25mm) |
| VC Material | High Temperature Copper |
| VC Former Material | Black Anodized Aluminum |
| VC Winding Width | .210" |
| Top Plate Thickness | .180" |
| Dimensions (Dia x D) | 6.56" (167 mm) x 3.25" (83 mm) |
| Shipping Weight | 3.33 lbs (1.51 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.