More Views

Atlas Sound IPDSC-DSE+ PoE+ IP Compliant Indoor Wall Mount Dual Sided LED Display with Loudspeakers and Flasher (Discontinued)
Part # IPDSC-DSE+
Model # IPDSC-DSE+

The Atlas Sound IPDSC-DSE+ is an indoor dual sided display incorporating loudspeakers and LED flasher. It can display time as well as scrolling text and leverages the VoIP communication solution to extend notifications with effective visual text alerts for high ambient noise areas or large spaces.

Need Quantity Pricing?

We provide quantity discounts for contractors & installers, schools, government, and military buyers on select brands and products.

Talk To An Engineer

Description

Details

The AtlasIED IPDSC-DSE+ is an indoor dual sided display incorporating loudspeakers and LED flasher. It can display time as well as scrolling text and leverages the VoIP communication solution to extend notifications with effective visual text alerts for high ambient noise areas or large spaces.

The AtlasIED IPDSC-DSE+ registers as a communication endpoint directly within InformaCast, SA-Announce, and GCK advanced notification applications, supporting both visual text and audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, scheduled announcements & intercom, while leveraging the WAN/LAN network architecture.

When used within a Cisco Environment, these same IP dual sided LED displays with loudspeakers from AtlasIED can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and loudspeakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).

When receiving an emergency notification, the flasher on the IPDSC-DSE+ becomes active and blinks. When the emergency notification is complete, the IPDSC-DSE+ flasher stops blinking.

In addition to visual signaling, the IPDSC-DSE+ can provide audio via its integrated loudspeakers or to support distributed analog public address systems with the convenience of line level audio outputs. This line level output is ideal for use with AtlasIED AA, PA, DPA, or CP series amplifiers to power large zones of traditional 25V, 70.7V, or 100V AtlasIED loudspeakers or paging horn loudspeakers.

It also includes 2 GPI inputs, 1 GPI output, and microphone input for talk back or listen applications. The GPI/O ports offer triggering for critical alert notification or unified connectivity of third party systems.

Under Title II of the ADA, all state and local governments are required to take steps and ensure effective communication to people with disabilities. The AtlasIED IPDSC-DSE+ is an indoor dual sided display incorporating loudspeakers and flasher provides effective communication for all individuals.

Features

Features

  • Network controlled, high visibility red LED display
  • Auto registration and auto provisioning
  • 16 x 64 LED dot matrix display
  • Multicast enabled network clock control
  • Cisco SRST compliant
  • Power using IEEE802.3af compliant PoE switch or local 12VDC-18VDC PSU
  • RJ-45 female input on PCB
Specification
System
TypeIP Dual Sided LED Display with Loudspeakers
Operation ModeSelf Powered
IndicatorsNetwork Status (On Back)
Operating Range (-10db)250Hz - 9kHz
Coverage95° 800Hz - 4kHz
Max SPL at 1 m (passive)93 dB SPL Continuous / 96 dB SPL Peak
Recommended Signal ProcessingBuilt-In Processing
General Purpose InterfaceTwo Trigger Inputs / One Relay Output (2A @ 30 VDC)
Transducers
Transducer Qty and Size2" x 4" - per side
Voice Coil Size0.5"
Cone MaterialTreated Industrial Paper
Driver ProtectionBuilt-In Limiter
Amplification
TypeSingle-Channel Class D Topology
AC Power InputPoE or PoE+ and External 24VDC
Power Rating (RMS)15 Watts Max (802.3AT)
THD< 0.02%
CoolingPassive / Convection
Audio Inputs and Outputs
Input: Analog Audio Type(s)One Unbalanced Analog
Input: Analog ConnectivitySecured Screw Terminal Block
Input: Network Audio Type(s)G.711 U-Law / A-Law and G.722 Capable
Input: Network ConnectivityRJ-45 Female
Output: Analog Audio Type(s)One Unbalanced Line Level
Output: Analog ConnectivitySecured Screw Terminal Block
Output: Loudspeaker Level8Ω, 9W (802.3AF), 15W (802.3AT)
Output: Loudspeaker ConnectivityTwo x Secured Screw Terminal Block
Display
Display TypeLED Display
Display Color RangeRed Only
Display Lumens162lux
LED's Per Character16 x 64
Character Max Height2.125" (54 mm)
Viewable Dimensions (H x W)10.125" (257 mm) x 2.5625" (65 mm)
ControlTime via NTP - Text Controlled via Software
Flasher
Flasher TypeLED
Flash Color RangeRGB
Flasher Lumens310lux (Red), 348lux (Green), 352lux (Blue)
Flash Rate(s)Multi Speed Capable
Viewable Dimensions (H x W)0.5" (12 mm) x 3.5" (89 mm)
ControControlled via Software
Software
SA-Announce Compatible Versions9.0.18+
InformaCast Compatible Version8.0+
GCK Compatible Version3.0+
Network
EthernetIEEE802.3 10 / 100Base-T
PoEIEEE802.3AF / AT Compliant
VLANIEEE802.1q Tagging
Protocols
IP AddressingDHCP / Static
Auto-ProvisioningHTTP / TFTP
Auto-RegistrationHTTP / Service Location Protocol / IEDNet
TimeNTP
TelephonySIP
Enclosure
ColorBlack with Brushed Silver
Mounting/Rigging ProvisionsMounting Plate provided with Various Hole Patterns
Safety Agency RatingsETL Listed to Comply with UL-60950-1, and CAN/CSA-C22.2 No. 60950-1
Ingress ProtectionIP-XX (Not provided)
LogoBlue and Removable
Product Dimensions (H x W x D)9.9" (251 mm) x 19.94" (506.5 mm) x 7" (177 mm)
Shipping Dimensions (H x W x D)10.6" (269 mm) x 25.4" (645 mm) x 12.8" (325 mm)
Net Weight5 lbs (2.27 kg)
Shipping Weight13 lbs (5.89 kg)
Documents

Documents

Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: Atlas Sound IPDSC-DSE+ PoE+ IP Compliant Indoor Wall Mount Dual Sided LED Display with Loudspeakers and Flasher (Discontinued)